PDA

View Full Version : Doser 2 Powerbar Compatability


h3dgehog
04/16/2016, 08:23 AM
I understand that the Doser 2 does not currently have the ability to control a powerbar. Is there any work or thought being put into allowing the doser 2 to be able to control a powerbard? Hoping that matthias will opine on the subject.

If not, is it a lack of hardware inside the doser 2 unit or is it a lack in the firmware/software?

Matthias Gross
04/16/2016, 10:13 AM
Hi

yes, I plan to do that. The hardware and software is compatible (and even already prepared to connect Doser and Powerbar), it is just a time problem.
Maybe you recognized this small hole in the rear of the doser - it is planned to ad there a pH-card, avaliable as accessory - so we have pH and temperature and dosing which may control a powerbar.

It is definitely on my list.

h3dgehog
04/16/2016, 06:32 PM
Hi

yes, I plan to do that. The hardware and software is compatible (and even already prepared to connect Doser and Powerbar), it is just a time problem.
Maybe you recognized this small hole in the rear of the doser - it is planned to ad there a pH-card, avaliable as accessory - so we have pH and temperature and dosing which may control a powerbar.

It is definitely on my list.

Just to be clear here, you are planning to add Ph Monitoring and powerbar control from the Doser 2 unit? If so, that is freaking awesome! Any idea on timing for completion? Not looking for a guaranteed time/date but a best guess +/- few months.

Matthias Gross
04/17/2016, 12:24 AM
Yes, I do. The doser is already prepared for measuring pH with a card (there is an expansion slot inside).

We want to have it in September 2016.

itsmorefun
04/17/2016, 01:25 AM
Hello,
In the future, it is planned that level, temperature ports and pH-card of standelone doser2 will be accessible profilux in slave mode?

Thank you :-)

Jerel
01/08/2017, 08:28 AM
Hello,
In the future, it is planned that level, temperature ports and pH-card of standelone doser2 will be accessible profilux in slave mode?

Thank you :-)

+1 For modularity

minus9
01/09/2017, 02:54 PM
Patiently waiting for the pH expansion and powerbar.

01/10/2017, 09:34 AM
It's in the pipeline. Let's get the P4 out first. ;)

minus9
01/10/2017, 10:40 AM
Well, okay if you insist. :rolleyes: