Float Switch

[Honeygs]

Is there anyway to get a replacement float switch for a Tunze 3155? I believe that's what it is called. Please see pic. Thanks.

[rvitko]

Part 3152.300 is the full switch, I would just replace the actual bobber and c clip as otherwise it would need to be soldered in and that is all you need. I would order the switch but just move over the two parts needed as from the time frame of yours it won't plug in like the new ones.

[Honeygs]

Thanks so much for the information. Even though the replacement part says "Nano", it will still work on mine?

[rvitko]

Yes, it says nano because it has the plug for the nano osmolator, this has to be cut off and the cord soldered to the board on a regular osmolator, also, since the float is only a back up, it rarely fails, on the nano it is the main switch and will only last a few years. In this case you only need the c clip and bobber and they are identical (same part).