ezerasurfr
06/08/2016, 03:59 AM
Hey all! I have a pretty new setup and have been getting everything dialed in, but something that I've not expected is happening. My evaporation rate is super low. I have approximately 220 gallons spread across my DT (180), sump (40b) and refugium (20L.) I'm literally only seeing about 1 gallon/day evaporation.
My DT is in my office, kept around a constant 69f. I have a ceiling fan, and I open the window during the work day to help with oxygen exchange. The sump and fuge are in the garage behind my office. Approximately 1/2 of the sump is covered with an acrylic top (because it's low to the ground, to keep debris out.) and the fuge is open 2/3 with a top only over the return and drain lines to keep salt spray to a minimum.
I feel like I should be replacing more water than this :confused:
My DT is in my office, kept around a constant 69f. I have a ceiling fan, and I open the window during the work day to help with oxygen exchange. The sump and fuge are in the garage behind my office. Approximately 1/2 of the sump is covered with an acrylic top (because it's low to the ground, to keep debris out.) and the fuge is open 2/3 with a top only over the return and drain lines to keep salt spray to a minimum.
I feel like I should be replacing more water than this :confused: