Tunze 3155 lights flashing and alarm sounding

[gicol]

New system, was working for a couple of days, but now I keep getting the low and high level red lights flashing and alarm beeping. If I unplug the system and plug it in again, the pump turns on and the water fills for about 10 secs, then I get the flashing lights and alarm again.

I read this could be due to water getting into the controller, but it has not been wet at all. Is there a fix I can use, send in for repair?

This is the second system I have bought that has this problem...
Argh.

[rvitko]

A blinking too low and solid too high is the water damage indicator. The most common cause is that the power supply tip got wet and was plugged in wet. It can usually be repaired if it is minor.

[gicol]

Thanks for the quick reply. where do I send it in for repair?

[rvitko]

If you are in the US send it to me, if you are in another country, do not send it to me. Let me know and I will direct you to the right repair center.

Tunze USA
305 Victor St
Austin, TX 78753

Be sure to include your return address and phone number.