PDA

View Full Version : Stuck on Dispensing


injun1
06/30/2016, 07:40 AM
I have been using the Storm for a while and have finally got around to setting up my renew. Unfortunately, I can't seem to figure out why it won't work. The fill and metering stages work fine. It gets stuck on dispensing and then all the lights start blinking. I've checked the hoses and there is no airlock or blockage. I'm not sure what to do next.

GenesisReefSys
07/03/2016, 02:10 PM
Hello!

I think the first thing I would do is check the cables and ensure that the Metering Reservoirs are fully plugged in. Sometimes they appear to be fully plugged in but are backed out just a tiny bit. Unplug them, and then plug them back in, pushing firmly until you hear or feel a "click."

If it isn't plugged in that could produce this sort of symptom. Another thing might be having the two Metering Reservoirs plugged in backward.

Also, if there's a way to take a video of the entire cycle and send it to us that would be a great help in troubleshooting.

Happy Independence Day!
Kevin