PDA

View Full Version : Spyglass mesh falling apart


TheWeaz
09/08/2016, 03:21 PM
I'm not sure if my carbon/GFO was what 'ate' away at this but is there an replacement material I can buy? Reactor is about 2 months old.


Anyone have something like this happen? I have the medium spyglass.


https://c8.staticflickr.com/9/8726/29549690535_0fd162f34e_z.jpg (https://flic.kr/p/M2cTv2)IMG_6858 (https://flic.kr/p/M2cTv2) by TheWeaz (https://www.flickr.com/photos/[email protected]/), on Flickr
https://c2.staticflickr.com/9/8820/28926914753_18dfb80246_z.jpg (https://flic.kr/p/L5aZXx)IMG_6857 (https://flic.kr/p/L5aZXx) by TheWeaz (https://www.flickr.com/photos/[email protected]/), on Flickr

Adamc1303
09/10/2016, 10:09 PM
I have the same issue

Avast Marine
09/12/2016, 07:00 AM
The material is 316 Stainless Steel and I have never seen or heard of this happening before but if there is two instances I would like to gather some more information. Both of you can send us an email at [email protected] and we will send out replacements free of charge in the meantime.

I can't imagine any media we use in reef tanks being able to have a reaction with this material to cause this so I imagine it has to be abrasive but GFo should be much softer than SS so I am at a loss. Once we gather a little more info I will be able to send some details to our mesh supplier to find out if they have any ideas at all.