m0nkie's 560gal

[m0nkie]

Hello folks :) starting my built finally!! so posting a thread. I will have tons of questions later. I am not a handy person. let's hope all turns out nicely

10ft x 3ft x 30inches. 560gal Leemar Starphire

Moving this bad boy home was nerve wracking. No moving company would take the job. Finally found a rigging company to take on the job. Big shout out to Walkers Brothers Machinery Moving.

Planning to keep a mix reef. Got all my current fish and coral in QT. Set up some permanent fish and coral QT in the garage.

Equipment List:
-APEX gold
-Red Dragon 230w return pump (main)
-Red Dragon 80w return pump (for everything else)
-BK Deluxe 300 skimmer with Aquadrive HELIX
-2 48" ATI LED 8 bulb powermodule
-4 Sea Swirls
-2 Gyre 150
-Theiling Rollermat
-Genesis Storm Pro ATO
-Genesis Renew Pro AWC
-Emperor Aquatics 80w UV
-Dastaco Calcium reactor
-ARID reactor
-Eheim 300w heaters
-custom black sump from Advanced Acrylic
-custom ATO chamber and salt water container from AA
-Nextreef reactors
-Siporax box

needs a lot of cleaning still.. left the gap for my ATO/salt water container.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_141437_zps5qzbcuo0.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_141437_zps5qzbcuo0.jpg.html)

[m0nkie]

getting it out
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_085448_zps0fxwmg2b.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_085448_zps0fxwmg2b.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_091502_zpslw9zxvpq.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_091502_zpslw9zxvpq.jpg.html)

always that one douche neighbor who parks where she's not allowed to park.. now the truck can't get in..
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_110842_zps3plorr23.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_110842_zps3plorr23.jpg.html)

steel plates
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_114247_zpsfd0uofpi.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_114247_zpsfd0uofpi.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_114818_zpso72vdxjt.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_114818_zpso72vdxjt.jpg.html)

barely fits

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_120906_zpspyasjhsu.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_120906_zpspyasjhsu.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_123041_zpsnos5jzvd.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_123041_zpsnos5jzvd.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_124540_zpsbin8vaty.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_124540_zpsbin8vaty.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_131301_zpstw0hh4he.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_131301_zpstw0hh4he.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160922_133228_zpsbrpyag8t.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160922_133228_zpsbrpyag8t.jpg.html)

[m0nkie]

QT all set up too. going to transfer my current corals in after a few more days of cycle.

left side fish only. right side coral only
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20160920_144026_zps7i4of9me.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20160920_144026_zps7i4of9me.jpg.html)

Tropic Eden Reefflakes Aragonite Sand.. lost some on the way, but Premium Aquatics were very generous on the compensation

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/unnamed_zpspvvguxpg.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/unnamed_zpspvvguxpg.jpg.html)


some more equipment
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/11_zpspzwmh2pz.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/11_zpspzwmh2pz.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20160909_133903_zpsrwrnjs7b.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20160909_133903_zpsrwrnjs7b.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/unnamed_zpswaqbd244.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/unnamed_zpswaqbd244.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160728_154749_zpsshd4qwvn.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160728_154749_zpsshd4qwvn.jpg.html)

[Keelo]

Damn that's a monster for sure !! Good luck with the built.


Sent from my iPhone using Tapatalk

[pga7602]

Wow, that is freaking amazing. What is the estimated weight of the Stand and Tank?

[wishntoboutside]

Very nice. That tank is huge. Luckily I was able to get my 450 in with a bunch of help from friends. In days like that I always wish I had a few more. Good luck in the build as you have a lot of nice stuff to keep it strong. If I was closer I would come over and help you.

[jimmy007]

Wow crazy only took 2 guys to move that monster. So far so good man.

[m0nkie]

Wow, that is freaking amazing. What is the estimated weight of the Stand and Tank?

I think around 4000-5000lbs including the steel stand

[benibarra23]

Oh man, and I thought moving my 150 was a pain.

[keepLearning]

epic!!!!!!!!!!!!!!!!!!!!!!!!!!

[solitude127]

Very impressive. congrats. keep the pics coming.

[m0nkie]

some rock designs (by Jestersix).. going to focus on minimalist style. 3 main structures. mainly small fish so lot of little caves for them to hide.

only 2ft of clearance up top.. so building in layers

https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/14359079_678385215659739_2554867841261889746_n.jpg?oh=a7b76ae00f81490dc58fb9c8d5fc1dd0&oe=58651E4C

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/IMG_8398_zps5mnk7ve8.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/IMG_8398_zps5mnk7ve8.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/IMG_8406_zpsfpaar3t9.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/IMG_8406_zpsfpaar3t9.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/IMG_8405_zpsyge0opif.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/IMG_8405_zpsyge0opif.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/IMG_8413_zpsbky0lhuw.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/IMG_8413_zpsbky0lhuw.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/IMG_8412_zpsrwk54hf9.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/IMG_8412_zpsrwk54hf9.jpg.html)

[acesq]

Those structures look great! Plenty of room to attach SPS, to place LPS under for more shade and to swim in and around for the fish.

[CoralsAddiction]

keep the pics coming.

+1

[SchnitzelReef]

4000-5000lbs with no water?? That sounds REALLY high. I would think closer to 1500lbs empty.

That is awesome that you found someone to move that tank. Really interested to know what that cost you. Next time I get a tank, I'm having someone bring it in my house. Way too much stress last time I did it...and that was with a 8' tank. I couldn't imagine a 10'.

Excited to see this tank setup. Looks like it's gunna be a monster!!!!!

[m0nkie]

I was told the tank should be around ~-1500 - 2000lb and the steel stand is solid. This is just an estimated number I got quoted on.

total moving price was $2100. up to 1mil insurance.

the other few rigging companies quoted well over $4000

[FishyBeaner]

MAN! this is already an epic build! can't wait to see it come together.

[dodgerblew]

WOW :eek1: is all I can say.

[SchnitzelReef]

I was told the tank should be around ~-1500 - 2000lb and the steel stand is solid. This is just an estimated number I got quoted on.

total moving price was $2100. up to 1mil insurance.

the other few rigging companies quoted well over $4000



[emoji33][emoji33][emoji33][emoji33]. Holy SH*T. That wasn't cheap. Well worth it though, on a tank that size.

[misterjimmy]

I am really looking forward to this build. Keep us posted and do not leave anything out :)

[ChefZilla]

Dang... and I was just at unique yesterday. Good luck on the build. Can't wait to see whatcha do with it

[ReefTron5000]

This is definitely one of the more baller builds I've seen recently. Seems like you are sparing no expense. What, if you don't mind, is your overall budget for this setup?

[Joe Kelley]

Congratulations, that is gorgeous!

[vuqchu]

Woah Tony. You're not messing around with that beast of a tank and list of equipment. Congrats! Looking forward to seeing it up and running.

[ArmanS]

Looking good! Love the equipment choices! Will be following!

[hersheyb]

WOW, $2100 just to have the tank moved....baller build

[fixmgood]

Epic move,looks worse than what it is,I took delivery of my 450 and there were just 8 more people than you had.Looking forward to following.

[robbous]

i am going to follow this i have a 500 Gallon Display

[m0nkie]

This is definitely one of the more baller builds I've seen recently. Seems like you are sparing no expense. What, if you don't mind, is your overall budget for this setup?

too much... :sad2: I had no intention of upgrading. Went to Unique Corals to buy some reactors and the opportunity just popped up. I planned to get skimmer and pump from Royal Exclusiv because I loved how my DC180 skimmer works. So I figured with those 2 pieces, my budget should be around 10k for everything...

then I decided to upgrade UV size, upgrade ATO, heck then might as well buy the AWC along with ATO.. before you know it, 20k gone.. I have almost all the equipment ready now. Just need to spend a few hundred more on plumbing

I think the only major equipment left is the tank chiller and a split AC for myself. I am looking at a 1.5HP tank chiller. Probably going to be another 3k after the installation

also looking at some future equipment: Minstream, JWelsh's Testers, MOAI robot, etc.

[m0nkie]

couple more pictures.. going to wake up early to finish the rockscape.. can't decide if this arch should be BIG and center piece or smaller, attached on other rocks.. making a small ~2ft arch for now.

https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/14440963_680879405410320_3737605249968672217_n.jpg?oh=a0f72d7e54b663529a157bfcae3faefe&oe=5885BEC9

https://scontent-lax3-1.xx.fbcdn.net/v/t1.0-9/14359154_680886145409646_9029603953742847363_n.jpg?oh=2888e7c7045fd2babd4f75cb4dbbac8f&oe=58720457

[pciscott]

Very nice toys! Good luck with the build!

[m0nkie]

Now i know how they feel..

Rock working

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160924_100114_zpsqafqocxk.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160924_100114_zpsqafqocxk.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160924_103240_zpsqzphgmft.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160924_103240_zpsqzphgmft.jpg.html)

[m0nkie]

finished look.. made the arch a little too high. now I can't put too much SPS up top.. maybe some montis or encrusting corals..

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160924_155650_zpssat947sx.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160924_155650_zpssat947sx.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20160924_155451_zpsuxaqfpjb.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20160924_155451_zpsuxaqfpjb.jpg.html)

[vuqchu]

Too late to curve the arch the other way like a hammock? Just a thought

[m0nkie]

I considered lowering the arch, but prefer the swim space. when I need the coral space, I have about 1.5ft empty space behind to make some shelf. cover the overflows

[waterman78]

m0nkie: I actually like what you've done with the rockwork, it will bring a much needed dimension to your viewers of the tank. I can see that you will enjoy watching the fish swim through the arch in search for food and refuge. Good luck with your build and thanks for sharing. BTW: I'm glad someone made that neighbor move to assist you with the tank delivery - the nerve of some people.....j/k. I can't wait to see the WET photos or videos with the equipment in action.

- Larry

[CoralsAddiction]

The only issue I've ever had (on a much smaller scale) with tall rock structures is obstruction of flow. Not something to worry about too much if you have plenty of power heads, etc.

[m0nkie]

I think my flow should be fine. the 4 sea swirls are running on oversized pump.

I'm currently switching my Gyre 150 to 280s

[theMerchant]

Looks great ! You can do wonders with emarco .
Have you consider running Triton? .... no water changes !

Sent from my SM-N910T3 using Tapatalk

[m0nkie]

came across some readings on it, haven't gone that route. I'm setting up a genesis auto water changer. I'm considering sending my water in once in awhile to Triton to see the numbers. Their salt and everything is pretty expensive to dose

[robbous]

Let me know how you like the genesis auto water changer I am looking for a used one for my 500 gallon system

[ArmanS]

Genesis AWC is the best on large tanks.

Great job on the build. You are making great progress at a much quicker rate then me! Can't wait to see more updates and I love the scape!

[savethereef]

Loving your tank. My tank is almost same dims just two feet shorter. I have some questions. Is your house on a slab? Also those steel plates are those just for the moving or something permanent?

Sent from my SM-N920P using Tapatalk

[m0nkie]

Loving your tank. My tank is almost same dims just two feet shorter. I have some questions. Is your house on a slab? Also those steel plates are those just for the moving or something permanent?

Sent from my SM-N920P using Tapatalk

my house sits on concrete and dirt. those steel plates are for moving purpose only. protection against the floor. mostly those hydraulic equipment. heavy metal wheels.

[m0nkie]

anyone know if the BRS sch80 parts are shinier than normal sch80?

sump is finishing up. estimate Friday 7th. then plumbing starts

BRS version
http://media.cdn.bulkreefsupply.com/media/catalog/product/cache/1/image/515x480/d4e8fcf9aa7a9b8db6e09f216ff5e920/2/0/202631-Schedule-80-Tee-T-grouped-a_1.jpg

LOWEST/HD version
http://mobileimages.lowes.com/product/converted/611942/611942091454lg.jpg

[JoshuaG]

Have you plumbed your rollermat in yet? CoralVue has all the metric stuff if you don't want to use the US adaptors, they have pipe too in small sections.

http://www.coralvue.com/plumbing-parts-aquariums

[m0nkie]

I'm still waiting on my sump. arrives next weekend. I bought the US adapters together with the rollermat.

[JoshuaG]

I'm still waiting on my sump. arrives next weekend. I bought the US adapters together with the rollermat.

Yeah I bought the adapters too but they kinda suck, the bulkhead for the emergency drain is cut to 1/2" And the bulkhead for the input takes away the pipe that sits inside the rollermat to disperse the flow. I'm planning on ordering all metric stuff to use all the plumbing the way it was designed, was only gna be about $30 or so

[m0nkie]

I see. thanks for heads up. I haven't even looked into the designs yet. It'll be one of the last pieces plumbed in, I'll look into the fittings. Do you have issue with output noise? I've been reading some ppl complaining

[JoshuaG]

I see. thanks for heads up. I haven't even looked into the designs yet. It'll be one of the last pieces plumbed in, I'll look into the fittings. Do you have issue with output noise? I've been reading some ppl complaining

No output noise, here is how I did mine. The plug at the top is just hand loose, it allows air out but blocks any noise you might hear in the pipe.

[m0nkie]

gotcha! thanks

[sandyland]

Looks like this will be an awesome build.
Keep up the good work

[Roger30]

looks great! want to follow along!

[m0nkie]

The sump is delayed for another week. Bah.. Can't do any plumbing. Taking the time to add more electrical outlets around the room. Drilled some holes for RODI line and bought a Spectrapure Maxcap. also wired a Cat6 cable to the tank for APEX.

some more goodies arrived..

plumbing parts.. wanted white and red tank for years but somehow ended up with all black. Black wall, black tank, black sump, red pipes

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161006_205625_zpsmoyijpiy.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161006_205625_zpsmoyijpiy.jpg.html)

4 Seaswirls arrived today
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161006_205637_zpsppnyoevd.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161006_205637_zpsppnyoevd.jpg.html)

room is starting to get crazy with equipment
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161006_205756_zps8focqlhn.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161006_205756_zps8focqlhn.jpg.html)

[misterjimmy]

Man judging from the last photo its like Christmas came early for you :D

[m0nkie]

so the Gyre 280 standalone unit is still out of order.. this got me thinking about switching to Vortech MP60s. The only pump that won't have any wires inside the tank, which I really dislike.

What do you guys think? 2 Gyre 280s or 5 MP60s. (I know gyre quality)

I also have 4 seaswirls for returns.

2 MP60 on each side and 3 on back wall? over kill?
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20160924_155650_zpsrkq1q9a6.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20160924_155650_zpsrkq1q9a6.jpg.html)

[dodgerblew]

Have you thought about Panta Rhei?

[m0nkie]

I have never heard of it. I will look into it now thanks!

[m0nkie]

wow nice pump. I don't like the wiring, but it sure looks powerful. maybe 1 ECM63 will take care of my tank. I'll talk with Dave about this.

[CoralsAddiction]

You should talk to some Abyzz pump users. It might be what you are looking for.

[m0nkie]

Abyzz is the expensive return pump right? I already have enough RD pumps for that. Need some powerheads for flow

[CoralsAddiction]

Abyzz is the expensive return pump right? I already have enough RD pumps for that. Need some powerheads for flow

That's what I used to think about Abyzz pumps too...expensive return pumps until one member here showed me how he used it for flow and a Red Dragon pump for return. His tank is silent and no excessive hardware for a clean look. I am sure you've done the math on on the cost of 5 MP60s so you might as well look into Abyzz. It's not for everyone but if I were in your shoes it's something I'd definitely look into before pulling the trigger on Gyres or Vortechs.
Just make sure you talk to someone who has experience with them.
<iframe width="560" height="315" src="https://www.youtube.com/embed/zftPBX876jY" frameborder="0" allowfullscreen></iframe>
<iframe width="560" height="315" src="https://www.youtube.com/embed/1e3m9QvYRSI" frameborder="0" allowfullscreen></iframe>

[m0nkie]

impressive. i will look into it. guess I'll take another trip to Unique

[wishntoboutside]

you may not need this. You are using one RD for return and the other for a closed loop? right.. if so those RD pumps are pretty powerful. depending on what mode you may not like the noise of a gyre or mp60 if the wall behind the tank is a bedroom. what current flow turnover rate and internal flow rate are you reaching for I guess is the best question to ask. my first batch of fish in my 450 are getting blown around with two tunze 6255. I had to turn them down some. I know this may change in time but I think my flow is fine for the time being.

[m0nkie]

I'm not running closed loop. That seems like the option to go for big tanks? I just don't like all the PVC plumbing. Got 1 RD230 for the 4 seaswirl returns. 1 RD180 for manifold. I assume I'll be running both on low %

haven't calculated the flow numbers yet. I just wing it by how my fish swim. haha.. I was thinking a few MP60s at first and then add more as SPS grows. but now I'm really liking the Panta Rhei ECM63. seems like 1 can push the whole tank. Less power, less heat, less controllers. Cheaper than a bunch of MP60s.

just can't find many users with these German pumps

[wishntoboutside]

the RD3 pumps are strong. I have it running at 80 watts and it goes thru a UV.. down a wall to an external chiller back into 2 sea swirls. The other RD3 goes to 2 other sea swirls and at 75 watts. If I go above 120 my water level rises and the sump drops quickly.
I know the abyss stuff is really nice but I don't know to much on the Panta pumps. One can never go wrong with mp60's or tunzes. Anything gets chucky inside the tank. My 6255 are chunky for sure.

[dodgerblew]

I remember talking to Scott when he was at Unique prior to his new adventure and he had one of the Panta Rheis at one end of his raceway and he said it was incredible flow in the raceway. Talking with Dave is a good bet Tony.

[m0nkie]

I remember talking to Scott when he was at Unique prior to his new adventure and he had one of the Panta Rheis at one end of his raceway and he said it was incredible flow in the raceway. Talking with Dave is a good bet Tony.

talking to Dave is a sure way to spend money! :lol2:

I ordered the ECM63 to test out. Dave said it will spin the water in my tank and then some... thanks for showing me this gem Rik!

[dodgerblew]

Yeah but Dave never steers you in the wrong direction when it comes to spending money.

My pleasure Tony. I have my snorkel and fins ready :lolspin:

[m0nkie]

good news is sump is finished. bad news delivery guy got "stuck". so I'll see if I can get it this weekend..

in the mean while. some pictures of new equipment

Panta Rhei ECM 63 pump. This and 4 SS should handle all the flow needs for now
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161014_221632_zpskrtastjc.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161014_221632_zpskrtastjc.jpg.html)
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161015_000920_zpsu5nm4rmc.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161015_000920_zpsu5nm4rmc.jpg.html)

very expensive snail guard... and no instruction on how to install it..
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161015_000937_zpscivze9ch.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161015_000937_zpscivze9ch.jpg.html)

[dodgerblew]

Looks like you might unscrew the cover, then screw the bottom of panta Rhei to cover and screw cover back on

[CoralsAddiction]

in the mean while. some pictures of new equipment

Panta Rhei ECM 63 pump. This and 4 SS should handle all the flow needs for now


Can you do a video of the pump in action when you install it?

[bobafet1]

Hey bro, let me know if you still need help hanging the lights. I can swing by this week.

[m0nkie]

Hi mike. Yes plz. Anyday is cool thanks

[m0nkie]

Can you do a video of the pump in action when you install it?

Definitely will do

[m0nkie]

Looks like you might unscrew the cover, then screw the bottom of panta Rhei to cover and screw cover back on

pretty well built unit. the front grill can be twisted off. no other screws on the unit. nothing else is removable.

the cover came with 6 rotor like attachments but no screws. I wonder if Dave forgot to mail something.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161015_101425_zpsxbws5sd4.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161015_101425_zpsxbws5sd4.jpg.html)

[m0nkie]

Spectrapure maxcap unit arrived
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161015_103741_zpssscoa1zc.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161015_103741_zpssscoa1zc.jpg.html)

reef octopus skim collector
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161015_103814_zps5k5u7byw.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161015_103814_zps5k5u7byw.jpg.html)

[m0nkie]

Looks like you might unscrew the cover, then screw the bottom of panta Rhei to cover and screw cover back on

that was exactly it.. :spin2: somehow I've been trying to cover it through the wrong way. thanks!


http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161015_112646_zpsd7frrxo3.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161015_112646_zpsd7frrxo3.jpg.html)

[dodgerblew]

Such incredible equipment Tony. You've come a long way from my $15 chalice frags

[m0nkie]

Here we go. Sump is here. Thanks to John at advanced acrylic.

Sump was divided in 2 for easier fitting. Entire back roll has different sized holes for equipment plumbing. Also built a few controller holders. John will come do all final fixing after

Left sump: 3 sock holder, sock silencer, theiling rollermat section, skimmer section.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_191130_zpsfkedvpny.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_191130_zpsfkedvpny.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_191410_zps8ktuft90.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_191410_zps8ktuft90.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_191418_zps7qu2xngx.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_191418_zps7qu2xngx.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_191506_zpswbrruti5.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_191506_zpswbrruti5.jpg.html)

Right sump: refugium, biorock box, return section, dry section, uv holder, dosing containers, dosing tubes holders.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193105_zpsoprvy0wx.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193105_zpsoprvy0wx.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193208_zpsmk6b4fn2.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193208_zpsmk6b4fn2.jpg.html)

The dry section gets no water u less the sump overflows. Act as another 50gal holder. Ill put the calcium reactor and ARID inside.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193218_zpshh3kgk7q.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193218_zpshh3kgk7q.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193323_zpsvxp4zg2j.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193323_zpsvxp4zg2j.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193331_zpswawnpqys.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193331_zpswawnpqys.jpg.html)

[SchnitzelReef]

Very cool sump. Lots and lots of toys.

You think socks and roller filter is necessary? Seems overkill.

[m0nkie]

A little redundant. I tend to overfeed so i must have filter socks. And i get lazy on changing them out.

This will also be good for long vacations. Ill take the socks out. Everything else is automated too

[deaclauderdale]

That's one beast of a sump! Things are coming along nicely, can't wait to see her wet.

Reef keeping is life!

[wishntoboutside]

looking good. I am sure you will be a busy boy this weekend trying to put some things together.

[m0nkie]

question guys.

The steel stand has these 1/4" stumps on each leg. The sump is sitting on the corner of the stumps. So all 4 corners are flat but it is lifted about 1/2".

Would these work to fill the empty space under the sump? not looking for spill protection, just some stuff to fill the space. 1/2" acrylic boards get expensive

Spillguard Resistant Rug Pad
https://www.amazon.com/Spillguard-Resistant-Rug-Thick-Rebond/dp/B00L1KVU0M/ref=sr_1_2?ie=UTF8&qid=1477090613&sr=8-2&keywords=0.5%22%2Bthick%2Bpad&th=1

[lowbudget]

you are spending crazy amount of money on the setup dont think those 1/2 acrylic board are that much more do it right

[m0nkie]

you are right..

going back to AA to cut me a few sheets.

[m0nkie]

Terrible at planning.. not enough parts.. waiting for more to come.

In the mean while, i'm making a modified bean animal. Left overflow has 2 pipes. 1 emergency 1 full siphon. Im using a strainer for siphon. Right overflow is open channel. Ill adjust the full siphon and hopefully reach a quiet point.

More goodies. Ultra Reef reactors
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161022_122720_zpsirhwnycz.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161022_122720_zpsirhwnycz.jpg.html)

[m0nkie]

Big thanks to Mike bobafet1 for hanging these lights for me!

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161023_191235_zpsrzbkmrup.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161023_191235_zpsrzbkmrup.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161023_191323_zpsw2t1lbvw.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161023_191323_zpsw2t1lbvw.jpg.html)

[BeanMachine]

Very cool.

[dodgerblew]

Impressive. Are those ATI hybrids

[m0nkie]

yes they are the hybrid powermodules

[CoralsAddiction]

It's looking really nice.

[wishntoboutside]

love it your lights are looking very patriotic. red, white and blue! very cool.

[m0nkie]

grow light is here! I mean... refugium light

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Untitled_zpsbz0xcjsq.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Untitled_zpsbz0xcjsq.jpg.html)

[vuqchu]

woah on the lights. drool

[bobafet1]

Big thanks to Mike bobafet1 for hanging these lights for me!

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161023_191235_zpsrzbkmrup.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161023_191235_zpsrzbkmrup.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161023_191323_zpsw2t1lbvw.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161023_191323_zpsw2t1lbvw.jpg.html)

No problem bro!

[bobafet1]

Terrible at planning.. not enough parts.. waiting for more to come.

In the mean while, i'm making a modified bean animal. Left overflow has 2 pipes. 1 emergency 1 full siphon. Im using a strainer for siphon. Right overflow is open channel. Ill adjust the full siphon and hopefully reach a quiet point.

More goodies. Ultra Reef reactors
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161022_122720_zpsirhwnycz.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161022_122720_zpsirhwnycz.jpg.html)

what are you going to be using the reactors for?
All these toys you're getting make me want to buy the same. hehe

[m0nkie]

Carbon and gfo.

I got sick of my nextreef. The screws take forever to loosen. These have twist locks and the whole thing comes off the base. Water flows out the reactor from all sides

[pga7602]

I'm glad you went with Sand. Very nice setup indeed!

[SchnitzelReef]

grow light is here! I mean... refugium light

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Untitled_zpsbz0xcjsq.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Untitled_zpsbz0xcjsq.jpg.html)



Wondering why you chose this light over Kessils freshwater light? I would think the freshwater model would be better to grow Chaeto.

[m0nkie]

I had plans to buy your LED bulb at first. I've been using white HD flood lights for years. I was talking with a Kessil rep and they recommended the H series over freshwater light. The purple magenta color include red, and blue lights. Covers everything macro algae needs.

I have the ARID for chaeto. So I plan to grow some different macro algae for a show refugium. The Kessil is mainly for looks and sleek design. maybe useful in the future for other plants ;)

[SchnitzelReef]

I had plans to buy your LED bulb at first. I've been using white HD flood lights for years. I was talking with a Kessil rep and they recommended the H series over freshwater light. The purple magenta color include red, and blue lights. Covers everything macro algae needs.

I have the ARID for chaeto. So I plan to grow some different macro algae for a show refugium. The Kessil is mainly for looks and sleek design. maybe useful in the future for other plants ;)



Oh that's good. I never called and asked kessil. I almost bought a freshwater model too, good thing I didn't. Interested to see how it works growing macros

[bobafet1]

..... So I plan to grow some different macro algae for a show refugium. ....

Show refugium?? Wow, I gotta see that.

[m0nkie]

Show refugium?? Wow, I gotta see that.

that's the "plan" haha.. some red purple green macro algae.. but we'll see how it turns out.

drain plumbing finished... working on returns today.

connecting these 2 sumps was a PITA.. good thing I can fit inside the sump.

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161026_210551_zpskpi9ycgl.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161026_210551_zpskpi9ycgl.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161026_210655_zpsucfhzklv.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161026_210655_zpsucfhzklv.jpg.html)

[SchnitzelReef]

that's the "plan" haha.. some red purple green macro algae.. but we'll see how it turns out.

drain plumbing finished... working on returns today.

connecting these 2 sumps was a PITA.. good thing I can fit inside the sump.

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161026_210551_zpskpi9ycgl.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161026_210551_zpskpi9ycgl.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161026_210655_zpsucfhzklv.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161026_210655_zpsucfhzklv.jpg.html)

Sump and plumbing look good bro! [emoji1303]

Just checking, you are running a gate valve for the main siphon in your bean animal overflow? Make sure the gate valve is close to the over flow box, NOT close to the sump.

Also make sure you cut the siphon pipe about 1" under the water level in your sump. Otherwise the full siphon will never start.

[m0nkie]

Thanks. Whats the reason for having it next to the overflow instead of sump?

I have it next to the sump now to look cleaner. But i can switch it if needed

[m0nkie]

plumbing's on wait again... the return pump hole was drilled smaller. waiting on John to come fix this.. one thing about John at AA is he's always... late..

anyways. upgraded the skimmer on coral QT. still testing out with some corals before putting everything in. also need to scrape those algae off..
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161029_144433_zpshbuqfssg.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161029_144433_zpshbuqfssg.jpg.html)

started mounting the APEX station. Display with Amazon Fire tablet. Going to have a black acrylic box built to mount all the APEX modules. the box will cover the outlet
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161029_144500_zpshdapqfzj.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161029_144500_zpshdapqfzj.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161029_144517_zpsfxum74o7.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161029_144517_zpsfxum74o7.jpg.html)

cycling with a tang
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/image000001_zpsimppbnt4.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/image000001_zpsimppbnt4.jpg.html)

[dodgerblew]

that's the "plan" haha.. some red purple green macro algae.. but we'll see how it turns out.

drain plumbing finished... working on returns today.

connecting these 2 sumps was a PITA.. good thing I can fit inside the sump.

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161026_210551_zpskpi9ycgl.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161026_210551_zpskpi9ycgl.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161026_210655_zpsucfhzklv.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161026_210655_zpsucfhzklv.jpg.html)
Looks like your sump has a roll of toilet paper in it. It's a dump sump.

[s2k]

Is it 2 ply rolls? Crazy build - when will you have water in it

[m0nkie]

lol.. the Rollermat is pretty much an expensive toilet paper roll.

I'm hoping next week. Literally just waiting on John to drill this hole and connect my return pump. and he bailed on me twice already

[SchnitzelReef]

Thanks. Whats the reason for having it next to the overflow instead of sump?

I have it next to the sump now to look cleaner. But i can switch it if needed



I would have to look it up, but I think it has to do with being easier to adjust. The further away the gate valve is, the more it fluctuates. Idk, Something like that. Not saying it won't work, but I remember reading about wanting it as close to the overflow as possible.

[m0nkie]

thanks gotcha. I kinda remember too. This is years ago from reading hundreds of pages on the overflow thread.. I think being closer, it's faster to trap the water and create the siphon.

anyways. John came to my house at 11pm last night and fixed the hole issue.

time to continue plumbing. should finish return by tonight. Then it's time to test the overflows

[benibarra23]

Here we go. Sump is here. Thanks to John at advanced acrylic.

Sump was divided in 2 for easier fitting. Entire back roll has different sized holes for equipment plumbing. Also built a few controller holders. John will come do all final fixing after

Left sump: 3 sock holder, sock silencer, theiling rollermat section, skimmer section.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_191130_zpsfkedvpny.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_191130_zpsfkedvpny.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_191410_zps8ktuft90.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_191410_zps8ktuft90.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_191418_zps7qu2xngx.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_191418_zps7qu2xngx.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_191506_zpswbrruti5.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_191506_zpswbrruti5.jpg.html)

Right sump: refugium, biorock box, return section, dry section, uv holder, dosing containers, dosing tubes holders.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193105_zpsoprvy0wx.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193105_zpsoprvy0wx.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193208_zpsmk6b4fn2.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193208_zpsmk6b4fn2.jpg.html)

The dry section gets no water u less the sump overflows. Act as another 50gal holder. Ill put the calcium reactor and ARID inside.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193218_zpshh3kgk7q.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193218_zpshh3kgk7q.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193323_zpsvxp4zg2j.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193323_zpsvxp4zg2j.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161020_193331_zpswawnpqys.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161020_193331_zpswawnpqys.jpg.html)

Im interested in how the theiling rollermat. Way cool idea. Is it a cloth that you throw out after its all used?

[m0nkie]

it's a type of fleece, 20g/m² filtration pore size.

Basically water filters through it until detritus builds up on the pore and clogs it. Water level will increase inside, moving the roller. The roller will rotate the "toilet papers" until water can pass through clean pores again. The discarded fleece will be rolled up above water level. This way detritus won't build up like an old filter sock. after a few months, just toss out the roll and put in a new one.

I plan to test out the rollermat along with socks. But it's mostly for vacation preparation. Remove the filter socks and attach the rollermat

[m0nkie]

finished basic plumbing! time to cycle :)

I'll work on the manifold later.. waiting on more parts from BRS.

getting crowded.. playing tetris and leaving room for future plumbing. Depending on how loud this gets, I have silicone hose ready
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161031_215030_zpsiyibnj2q.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161031_215030_zpsiyibnj2q.jpg.html)

back wall
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161031_215043_zpscaghue05.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161031_215043_zpscaghue05.jpg.html)

Sea Swirls
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161031_215154_zps0xsncwcc.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161031_215154_zps0xsncwcc.jpg.html)

[Dhoggs]

Cant wait yo see the system with livestock in it:)

[m0nkie]

I knowww.. but QT is going to take months.

Here's my fish list so far... not sure to buy the wrasse pairs or trios.. not sure how many anthias each... waiting on the experts for some advice

- Royal Gramma (~9)
- Lyretail Anthias (~3)
- Bartlett's Anthias (~3)
- Dispar Anthias (~3)
- Bimaculatus Anthias (~3)
- Fathead Sunburst Anthias (~2)
- Sailfin/Algae Blenny (???)
- Midas Blenny (???)
- Kaudern's Cardinalfish (~3)
- Blue/Green Reef Chromis (~9)
- Firefish (???)
- Exquisite Firefish (???)
- McCosker's Flasher Wrasse (~2)
- Mystery Wrasse (~2)
- Flame Fairy Wrasse (~2)
- Scott's Fairy Wrasse (~2)
- Labout's Fairy Wrasse (~2)
- Lineatus Fairy Wrasse (~2)
- Leopard Wrasse (~2)
- Golden Rhomboidalis Wrasse (~2)
- YB Blue Tang (~3)
- Yellow Tang (~1-3)
- Achilles Tang (~1)
- Desjardini Tang (~1)
- Black Niger Trigger (~2)

[solitude127]

Nice list. no sand dwellers?

[m0nkie]

I was thinking Mandarins and Ruby Scooters in the future.. not sure what else for sand dwellers.

I'm on the fence with my diamond gobies.. they do a great job cleaning the sand, but irritates all the frags on sand bed. and they are impossible to catch after..

any other suggestions?

[SchnitzelReef]

I was thinking Mandarins and Ruby Scooters in the future.. not sure what else for sand dwellers.

I'm on the fence with my diamond gobies.. they do a great job cleaning the sand, but irritates all the frags on sand bed. and they are impossible to catch after..

any other suggestions?



No diamond gobies. Not worth the headache. Cool fish though.

I hope you plan on running a screen top 24/7. That's a big list of jumpers

[m0nkie]

yup. John is suppose to come over to measure the screen top. I lost way too many wrasse in these couple years. They can find the tiniest 1" crack on the screen top

[solitude127]

yup. John is suppose to come over to measure the screen top. I lost way too many wrasse in these couple years. They can find the tiniest 1" crack on the screen top

Can you post pics of the screen top? I like the Artfully Acrylic ones but was wondering of other acrylic folk make something like that.

[solitude127]

I was thinking Mandarins and Ruby Scooters in the future.. not sure what else for sand dwellers.

I'm on the fence with my diamond gobies.. they do a great job cleaning the sand, but irritates all the frags on sand bed. and they are impossible to catch after..

any other suggestions?

Watchman gobies paired with snapping shrimp are always need to see. They'll stir up the sand a little but not a whole lot.

[m0nkie]

Ill post pictures when it's ready. Still doing measurements. I have to fit in the overflow box cover and the 4 sea swirls. Easier for someone to do measurement in house.

[dodgerblew]

Can you post pics of the screen top? I like the Artfully Acrylic ones but was wondering of other acrylic folk make something like that.
I love my screen top from Artfully Acrylic

[dodgerblew]

I knowww.. but QT is going to take months.

Here's my fish list so far... not sure to buy the wrasse pairs or trios.. not sure how many anthias each... waiting on the experts for some advice

- Royal Gramma (~9)
- Lyretail Anthias (~3)
- Bartlett's Anthias (~3)
- Dispar Anthias (~3)
- Bimaculatus Anthias (~3)
- Fathead Sunburst Anthias (~2)
- Sailfin/Algae Blenny (???)
- Midas Blenny (???)
- Kaudern's Cardinalfish (~3)
- Blue/Green Reef Chromis (~9)
- Firefish (???)
- Exquisite Firefish (???)
- McCosker's Flasher Wrasse (~2)
- Mystery Wrasse (~2)
- Flame Fairy Wrasse (~2)
- Scott's Fairy Wrasse (~2)
- Labout's Fairy Wrasse (~2)
- Lineatus Fairy Wrasse (~2)
- Leopard Wrasse (~2)
- Golden Rhomboidalis Wrasse (~2)
- YB Blue Tang (~3)
- Yellow Tang (~1-3)
- Achilles Tang (~1)
- Desjardini Tang (~1)
- Black Niger Trigger (~2)theres a more then good chance that your pairs or trios of fairy wrasses will turn male. That's a lot of males if it happens. A shoal of 6+ yellow tangs looks great.

[m0nkie]

does Artfully Acrylic do custom shapes? My biggest issue is designing it around the Sea Swirls.

I chose John because he's coming to my house to do measurements. I have never seen Advanced Acrylic lids before

theres a more then good chance that your pairs or trios of fairy wrasses will turn male. That's a lot of males if it happens. A shoal of 6+ yellow tangs looks great.

that's not going to be fun... i was hoping some female could lessen the aggression between the males. I have Flame, Rhomboid, and Lineatus male already. They harass each other all day, I can hear them jump and hit the nets

[dodgerblew]

Artfully Acrylic is a sponsor on the other big forum. They do any shape. I sent them measurements and a pic or two and fits like a glove.

[m0nkie]

Great. I'll give them a call tomorrow, have them design my QT lids. I'll be able to compare both AA's works side by side :D

[vuqchu]

If AA can make a "dreambox" pvc acrylic sump then I'm pretty sure he can make a sweet looking lid.

Build looking amazing so far. Can't wait to see it completely filled with those bad boys ATI on.

[m0nkie]

Man one leak after another.. problem with these hard plumbing is once the sump shifts position, it's so hard to fit it back. These two sumps are a few hundred pounds connected. Then the bulkhead leaked after i adjusted pipes.. then sump connection leaked again..

5hrs later.. i think we are all good now. I hate plumbing. Next set up im leaving it to the professionals

[m0nkie]

Testing google photo..

https://goo.gl/photos/nYZdS8HU8FstC1MfA

[m0nkie]

more leaks... more fixing.... stupid bulkheads..

anyways.. seems like we are back on track again..

happy thoughts..

controller holder made by John at AA
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/23_zps6h1pj8l7.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/23_zps6h1pj8l7.jpg.html)
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/unnamed_zps0irveimm.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/unnamed_zps0irveimm.jpg.html)

frag racks by AA
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/unnamed%201_zps2de8vpgp.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/unnamed%201_zps2de8vpgp.jpg.html)

heater rack by AA
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/unnamed%202_zpsvomqvkub.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/unnamed%202_zpsvomqvkub.jpg.html)

[SchnitzelReef]

Man one leak after another.. problem with these hard plumbing is once the sump shifts position, it's so hard to fit it back. These two sumps are a few hundred pounds connected. Then the bulkhead leaked after i adjusted pipes.. then sump connection leaked again..

5hrs later.. i think we are all good now. I hate plumbing. Next set up im leaving it to the professionals



I should have warned you. I did all my plumbing myself too. When I was done, I was so frustrated, I wish I had paid someone to do it. Just gotta find someone that will take the time and make it super clean. Next tank lll def hire someone.

[m0nkie]

ya I've been following a few large tank builts. much easier and relaxing to have this part done by the pros. Since I don't know plumbing parts, had to buy tons of extra from BRS. Now I have to deal with shipping extras back.

Anyone have recommendation on a good LFS that works on plumbing?

[ChefZilla]

ya I've been following a few large tank builts. much easier and relaxing to have this part done by the pros. Since I don't know plumbing parts, had to buy tons of extra from BRS. Now I have to deal with shipping extras back.

Anyone have recommendation on a good LFS that works on plumbing?

Call California aquariums In Reseda or Joe at unique

[m0nkie]

Call California aquariums In Reseda or Joe at unique

thanks! I should have just let Unique build it then. It's their tank anyways haha

[m0nkie]

plumbing was kind of loud.. took some advice and changed to the maggie muffler.

much more quiet now.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161105_103936_zps2iosnzjx.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161105_103936_zps2iosnzjx.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161105_103929_zpsflyxysn9.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161105_103929_zpsflyxysn9.jpg.html)

[SchnitzelReef]

plumbing was kind of loud.. took some advice and changed to the maggie muffler.

much more quiet now.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161105_103936_zps2iosnzjx.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161105_103936_zps2iosnzjx.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161105_103929_zpsflyxysn9.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161105_103929_zpsflyxysn9.jpg.html)



I thought you setup a bean animal? If the bean animal was loud, something was wrong.

I might be able to help diagnose, I went through lots of issues with mine before I got it dialed in perfect.

[m0nkie]

the thing with BA is I have 2 different overflows. I was on the BA thread discussing for awhile and most of them say I cannot achieve true BA effect.

with the 2 maggie muffler, I'm running the RD at 80%, both full open valves and still fairly quiet

another issue was with the weir teeth height. about 2 inches tall. water splash sound was loud. I raised the emergency and all the pipes higher. But if I want to use the BA's 90 pipe, it won't fit under the overflow cover

[m0nkie]

starting the plumbing work on manifold. good thing I'm a skinny and I can fit in and out..

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161105_175644_zpsov76jbq5.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161105_175644_zpsov76jbq5.jpg.html)

Also started on the Genesis Storm Pro and Renew Pro
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161105_174610_zps61nogznl.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161105_174610_zps61nogznl.jpg.html)

Vent fan installed. very quiet. can't hear it unless I stand directly under the vent. Minor hummm sound like AC under it
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161105_131835_zpsyp6kjs6e.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161105_131835_zpsyp6kjs6e.jpg.html)

[ArmanS]

Artfully Acrylic makes the best lids IMHO. I have one on my QT and they did a superb job!

Plumbing a huge tank like yours is tough. I am working so slow on mine and currently am plumbing the closed loops and its tough!

You are doing great so far man, just keep it up and once it is all finished and setup you will miss all the fun it is planning a build!

[m0nkie]

thanks Arman. worked out all the little kinks already. just patiently waiting to cycle now :)

very tiring plumbing. I'm sore and bruised all over..

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161106_010242_zps78nrri7p.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161106_010242_zps78nrri7p.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161106_010229_zpsazaefbem.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161106_010229_zpsazaefbem.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161106_010212_zpsrdpshxqa.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161106_010212_zpsrdpshxqa.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161106_010203_zpsvzlm82pi.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161106_010203_zpsvzlm82pi.jpg.html)

[FishyBeaner]

Nice work on the plumbing!


Sent from my iPhone using Tapatalk

[LesPaulPlayer]

The red pipe looks great.

[CoralsAddiction]

The rock structure on the left is looking fantastic.

[pga7602]

Whats this? "
Also started on the Genesis Storm Pro and Renew Pro"

Coming along nicely btw.

[m0nkie]

thanks everyone!

Whats this? "
Also started on the Genesis Storm Pro and Renew Pro"

Coming along nicely btw.

Genesis auto top off and auto water change bucket. 1 bucket stores fresh salt water for top off. 1 bucket stores waste salt water for draining.

has a lot of controlling to it:

-auto top off
-auto top off RODI refill
-auto shut off RODI pump if water below pump level
-auto shut off salt pump if water below pump level
-auto shut off salt pump if sump level is too low
-auto shut off salt refill if sump level is too high


http://genesisreefsystems.com/product/renew-pro-storm-pro-pumps/

[m0nkie]

Here it is the Panta Rhei at 100%. I turned off everything so there is no sound in the room. You can hear the little hummm noise as I get closer to the pump. Anything less than 80%, you cannot hear in a totally quiet room.

At 100%, you can see the waves at mid point still. minor waves at the end of tank. However, this is not like the WAV or MP pump where water goes very straight. Water seems to go in up and down motion. like how we would float on the ocean surface

I still need to move the pump a little lower. It's creating a small vortex at times. I will also move the pump to the right side and hide it behind the rocks

https://www.youtube.com/watch?v=kDlsq6z2hig


surface agitation is great too. With no other equipment on, this thing is moving a ton of water. you can see the waves crashing against every wall.

https://www.youtube.com/watch?v=cqbmS_EvwPQ

[m0nkie]

nothing too much happening.. just cycling. got the APEX up and running.

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161114_005329_zpsotkjvau3.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161114_005329_zpsotkjvau3.jpg.html)

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20161114_005459_HDR_zpszpdvdbsl.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/20161114_005459_HDR_zpszpdvdbsl.jpg.html)

[bobafet1]

How's that panta rhei working out?

[deaclauderdale]

Good looking mounting board.

Reef keeping is life!

[m0nkie]

thanks!

The Panta Rhei works really well. I received the English manual and started programming. It will be a lot better if I have a second unit to program together, alternating modes.. so far I'm just letting it run normal at 70%. cannot hear it at all. Plenty of flow in my tank right now with that alone. I haven't turned on the Sea Swirls yet

[iSeeMax101]

TONY!!!
I haven't been on here in months! figured I would stop in and see what the current events are... Jesus man! looking great! I thought you were going to hit me up when you started getting this thing together but looks like you're already done :lol: Cant wait to see this thing in person! Keep up the great work man!

[m0nkie]

TONY!!!
I haven't been on here in months! figured I would stop in and see what the current events are... Jesus man! looking great! I thought you were going to hit me up when you started getting this thing together but looks like you're already done :lol: Cant wait to see this thing in person! Keep up the great work man!

hahaha the worst is over... plumbing and leaks.. I just need to clean things up and get the equipment working.

let me know next time you plan a fishing trip (a few days ahead if possible). I can't do last minute trips anymore. have to go prescribe some motion sickness meds before heading out again

and bring your new ride :D

[iSeeMax101]

hahaha the worst is over... plumbing and leaks.. I just need to clean things up and get the equipment working.

let me know next time you plan a fishing trip (a few days ahead if possible). I can't do last minute trips anymore. have to go prescribe some motion sickness meds before heading out again

and bring your new ride :D

This ninja went and built a public aquarium in the living room!

Im trying to land a sales position at BMW. Could use the discount. waiting on the 335 and shooting for the m4! Lets see how that goes lol As of now these are just dreams I'm working on manifesting into a reality. Monster tank for me will have to wait.

Man, you see Mikey on FB?! Landing big tuna right now. Want to plan maybe 2 weeks? Gotta get it in while they are here!

[fixmgood]

I have not been an avid follower,looks great so far. It may have been mentioned earlier,easier this way,what size heaters are you using if any?

[m0nkie]

This ninja went and built a public aquarium in the living room!

Im trying to land a sales position at BMW. Could use the discount. waiting on the 335 and shooting for the m4! Lets see how that goes lol As of now these are just dreams I'm working on manifesting into a reality. Monster tank for me will have to wait.

Man, you see Mikey on FB?! Landing big tuna right now. Want to plan maybe 2 weeks? Gotta get it in while they are here!

Ya sure. just let me know ahead of time. I will try take work off.

I have not been an avid follower,looks great so far. It may have been mentioned earlier,easier this way,what size heaters are you using if any?

Thanks! I bought 2 EHEIM Jager 300w. Tbh I don't use that much heater. My house/tank is on the warmer side. so far I have only 1 heater connected and I'm running at 77 degrees without issue

[m0nkie]

halfway through calibrating, my APEX display froze.. and stayed dead.. ok no biggie, skip it using display.. ALD dead out of box. nothing will power it on.. -.-

I seem to have bad luck with parts.. new or used.. expensive or cheap

[m0nkie]

I can't decide if I should buy 500gal worth of CUC right now.. or only buy half of that...

I plan to do a full 90 day QT inside the display tank for this CUC.

If i buy the whole 500gal worth, I may lose quite abit through out the months..
If i buy only 100gal worth, I will need to set up another QT later on for another 90 days QT..

decisions decisions

[CoralsAddiction]

I can't decide if I should buy 500gal worth of CUC right now.. or only buy half of that...

I plan to do a full 90 day QT inside the display tank for this CUC.

If i buy the whole 500gal worth, I may lose quite abit through out the months..
If i buy only 100gal worth, I will need to set up another QT later on for another 90 days QT..

decisions decisions


perhaps buy 600-700 gallons worth to hedge against future losses and QT them all at once?

[solitude127]

I would by the 500g and just feed the CUC. Maybe keep the flow low so when you feed the CUC, it won't float around?

[m0nkie]

ok. I'm going to get my first order through reef cleaners. I'm sure I'll be receiving a million of those tiny cerith.. they make good CUC, just impossible to keep track of..

cerith snails
large florida cerith snails
nassarius snails
togan nassarius snails
turbo snails
conchs
shrimps

and whatever interesting I find at RAP.

thanks!

[m0nkie]

Photobucket is having so much issue lately.. trying out google photo.

Got the Rollermat hooked up. Not much to clean so it's off, but the plumbing is done. The intake was reduced to 19mm as recommended for separate pump. Output remained 40mm. Connected with a 30w Jebao DC pump which pumps out the recommended output at 90%.

I'm not sure if it works with the output completely submerged under water. It seems fine. 100% quiet. I don't have detritus to test out.

I have the sump designed so that the baffle after Rollermat traps all the detritus in that section. Water overflows from the top. easier to maintenance. This will be the most often cleaned spot.

https://lh3.googleusercontent.com/YgMmspz3FG3_0nXmdcVyjfGMR4i0aUvNoX2D4NrNJ-SK0SqxCP2iCAiLMKFaUQLm2oLdRYYIFnVtDwfvd1ean4BLpdiVjdzgaw--5fqaRwtTQx_AJD6uRy1GHpn0YhKtSebv-TbdzCTOHa5xnjFzOR7C588RFxOWnQQY2V8K0py1RRFw01K8PIUEyr8PXIR9FCwdhVHEn6g4TJ7rfkNcrwbBtgsLmLB8uDc9jgdy6 LdvtaA1Z6eOrgeyhbAmomFlyGzVhuTtvcz6OJeW0OCP4EK9g9H6XKI5HtDUM-exxs-w7ynb9b62z6EFUI1yAEXFQUPoLEQf3wt8gADUFDKtIS1RQhfJQyqZCvhvCjVmtmCwLTJ-hUVAK9XLWzZdC_6Zu9aBMbue8DXP4lwY0tjfDQXU01yODcYKUxgJrEAUYyw0yveXslanczRVnLXEtJ68PZ3uYbTWeYv_PRZDyl1g dZO-1UJBPw-tLh_7qVlTUygLK37EtKXLGSJo9nd7Y9zrAyXmx7FXKEVP8U9mDboDj4J5bF1NXJrD10tzS6tXRqMgAgAnB3PESS20MbNJMVqoAUe _3V-ZXaYEN9-82zBu4NQgFUQK11bAQKtnYVMkUGVoIo3N=w535-h951-no

https://lh3.googleusercontent.com/2UQZXOsGBlJdvKhCCaROXI6IGlW3D9DHFk5fJmZoQ-X9BWO8rRR4pbvpuRzJPZWfI-9GabDZEqHKuv7hw9TpGcwfq1VSen5jY4LWvSFeoyDT0tVCUXFTX_cK-3mDc0zQMmYOAUvROaCCwVJwHHJq1j6LXP6daHcrZNSRj4lbUfVFXCuIvL7F7mXCeWPQ425ThmHlB0ocEF_-CTP-rysd5CfA2p2Y-RI8BfvotO4wqHIz127POkjG4h4bt3PXKKnl68zMR25z3Jd_p6ti1sC45A0UxxjVDtT-ErlGDGetZqrkKIWaueHVUEFLqF2FGzN9NbRnLi0AVfrYS30jG52R1Jp2cguIDanXtsndNVPwUv1NoxXmBHiJbWCmpDpqsPZxvtca JaF3OOWtJmIumQWzsLhcY8huNnPOwhVe76XJ9QJHzAVM4IZtLDS2IFTxO_8yZHty4Twmuy-UlGqC04bOJ1vQm1afGuaYgsgjOeSnqR5iNQukcsSoqvLQ1sFFn9qb8_vb3j4KOS43BbzDHE0kiw3y3n7wLPxk78zJXNprK2Bge9z kYwntk2FSyb4f5nSOLyJPJvtGEstPFoXjG5Zj9mydGdq1urTeigiNOzklc92ef0Hw=w535-h950-no

[solitude127]

I kind of laughed when you mentioned it looked like roll of toilet paper and after seeing it setup, it really does look like a role of toilet paper. lol..

[Rakie]

imgur.com is the best photo hosting site by a LOT. Lots of room, doesn't lag, almost never has downtime or issues.

I can't understand why the reefing community uses photobucket. That stuff is like, 56k dial up era.

Move on RC!

[SchnitzelReef]

I can't decide if I should buy 500gal worth of CUC right now.. or only buy half of that...

I plan to do a full 90 day QT inside the display tank for this CUC.

If i buy the whole 500gal worth, I may lose quite abit through out the months..
If i buy only 100gal worth, I will need to set up another QT later on for another 90 days QT..

decisions decisions



Don't spend too much money on a cuc. My tank has a few nassarius snails, couple conchs, and that's about it. Cuc is a joke, they all end up dying

[SchnitzelReef]

imgur.com is the best photo hosting site by a LOT. Lots of room, doesn't lag, almost never has downtime or issues.

I can't understand why the reefing community uses photobucket. That stuff is like, 56k dial up era.

Move on RC!



I've tried using other hosting sites, and none of them seem to work as easily as Photobucket. I know photographers say Photobucket sucks, but I just can't get any other hosting sites to work as easily

[Rakie]

I've tried using other hosting sites, and none of them seem to work as easily as Photobucket. I know photographers say Photobucket sucks, but I just can't get any other hosting sites to work as easily

Really? For me it couldn't be easier! Super easy on the phone App or on the computer. Super simple drop down menu to change size of picture with explanation of which monitor size it's good for.

[m0nkie]

testing imgur.. seems like the direct image link they provide cannot be uploaded here. I have to copy image address (which adds .jpg at the end) for it to work.

still.. easy enough I guess. thanks!

http://imgur.com/bxZgYPO

http://i.imgur.com/bxZgYPO.jpg

[Rakie]

testing imgur.. seems like the direct image link they provide cannot be uploaded here. I have to copy image address (which adds .jpg at the end) for it to work.

still.. easy enough I guess. thanks!

http://imgur.com/bxZgYPO

http://i.imgur.com/bxZgYPO.jpg


When you click on the photo, you want to try the BBCode which is for message boards.

Direct click on "BBCode" = Link Copied immediately, pasted here, and photo

http://i.imgur.com/tSg1X7u.jpg

[m0nkie]

ahh gotcha! didn't see that little arrow with more options

[Rakie]

ahh gotcha! didn't see that little arrow with more options

Yep. I get that lots of places are stuck in their own groove but everytime I try and use photobucket it freaks out on me. love imgur, super lightweight, snappy, easily change image size as uploaded.

[socalcichlid]

Love seeing these updates! Thanks

[m0nkie]

not much going on with the tank... nitrite is still crazy high at 5+.. also waiting on AA to finish making the rest of my equipment

stocking up more and more corals in the QT.

my LC auction results! mostly LPS and zoa
http://i.imgur.com/U4Y1cGw.jpg

got some new Scoly. Bleeding Apple in the corner
http://i.imgur.com/7wuZCLJ.jpg

UFO and Warpaint
http://i.imgur.com/yTluzoX.jpg

my favorite new piece. Bleeding Orange
http://i.imgur.com/O9RuaVn.jpg

organized the shelves and bought a few more racks.. I think I can squeeze in 2 more racks.
http://i.imgur.com/rfADyMH.jpg

[m0nkie]

Anyone know what I can use to hand wipe the glass? magnets aren't the best options with these racks all over the place. I've seen shops use rag of some type. or some sheet.. not sure what though

[pga7602]

Anyone know what I can use to hand wipe the glass? magnets aren't the best options with these racks all over the place. I've seen shops use rag of some type. or some sheet.. not sure what though

This is what we use Tony. You can get it at any grocery store or even walmart. If you get two, take the sponge out of one to use in tight spots. It works so well that i was able to wipe hard coraline off acrylic without scratching.

https://usercontent2.hubstatic.com/3614370_f260.jpg

[m0nkie]

Thanks Tri :)

[CoralsAddiction]

my LC auction results! mostly LPS and zoa


got some new Scoly. Bleeding Apple in the corner
http://i.imgur.com/7wuZCLJ.jpg



I really dig the rainbow chalice :0)

[lowbudget]

magic eraser

[BeanMachine]

Good stuff. Whats your coral qt regimen? You proactively dipping?

[m0nkie]

thanks. QT is pretty easy for them.

I dip in lugol and bayer. Bayer for all the easy stuff. Lugol for any coral with cuts or new frags..

afterwards I put them in this tank. About to seal it off for 3 months fishless QT.

after that, I will frag the corals off the plugs and glue them into the DT.

then more shopping and more QTing

[Rakie]

thanks. QT is pretty easy for them.

I dip in lugol and bayer. Bayer for all the easy stuff. Lugol for any coral with cuts or new frags..

afterwards I put them in this tank. About to seal it off for 3 months fishless QT.

after that, I will frag the corals off the plugs and glue them into the DT.

then more shopping and more QTing

Sounds good!

Although your lack of delicious SPS is suspect :bounce3:

[m0nkie]

I am going to visit Will Bustayanky soon.. going to chop his collection hahaha..

got 2 more frag racks in the mail. saved the top shelf for SPS

[m0nkie]

one thing I've been trying to figure out is how do I glue zoa to rocks on the sandbed... I may need to go inside the tank for that? gluing these slippery zoa frags without a plug is not going to be easy

[BeanMachine]

one thing I've been trying to figure out is how do I glue zoa to rocks on the sandbed... I may need to go inside the tank for that? gluing these slippery zoa frags without a plug is not going to be easy

Just glue them to rubble rock instead of frag plugs.

[CoralsAddiction]

one thing I've been trying to figure out is how do I glue zoa to rocks on the sandbed... I may need to go inside the tank for that? gluing these slippery zoa frags without a plug is not going to be easy

Should be ok. I use a 20 mm scalpel to cut zoas and you can use tweezers to hold the frag till it attaches to rock. I've recently tried Ecotech Marine glue and it bonds much faster than anything else I've tried.

[m0nkie]

Should be ok. I use a 20 mm scalpel to cut zoas and you can use tweezers to hold the frag till it attaches to rock. I've recently tried Ecotech Marine glue and it bonds much faster than anything else I've tried.

thanks. I'll try that in the QT first. grow them out

Just glue them to rubble rock instead of frag plugs.

I bought those 2ft long tweezers. I need to stand on a ladder, probably lay flat on top of the tank, and then try to reach the sandbed with that tweezer.

if the flow blows that zoa away, it's gone... lol

[m0nkie]

Should be ok. I use a 20 mm scalpel to cut zoas and you can use tweezers to hold the frag till it attaches to rock. I've recently tried Ecotech Marine glue and it bonds much faster than anything else I've tried.

I can't get over your Gig profile picture. that rainbow looks so nice!

[CoralsAddiction]

I can't get over your Gig profile picture. that rainbow looks so nice!

Lol thanks :-)

[m0nkie]

graduated from Reef Crystal

http://i.imgur.com/YbyxJDN.jpg

[Rakie]

Good choice on the salt man, Fritz has been rock solid for me. The chemist for Fritz was at RAP, I should have spoken with him more!

[SchnitzelReef]

Let me know when your ready for some sps [emoji1303]

[wishntoboutside]

I like the snowboard in the background. let me know when you want to meet up and ride!

[solitude127]

Got a generator too, I see. What are you planning on powering with the generator? IME, the non inverter generators tend to be a little louder so I don't know if noise is an issue especially if you're running it at 2 in the morning.

[lowbudget]

Got a generator too, I see. What are you planning on powering with the generator? IME, the non inverter generators tend to be a little louder so I don't know if noise is an issue especially if you're running it at 2 in the morning.

when you share your generator with your neighbor i don't think they mind

[m0nkie]

I like the snowboard in the background. let me know when you want to meet up and ride!

thanks! I just setup the car yesterday for snowboarding. Going to Mammoth in 2 weeks. I'll be at Skidazzle this weekend shopping for more gears.

Cali weather! beach and snow ready
https://scontent.xx.fbcdn.net/v/t1.0-9/15317815_10101477123674310_752847625797721591_n.jpg?oh=f29cc7cc714536b258e437c3e4315ce5&oe=58C3CC1B

[m0nkie]

Let me know when your ready for some sps [emoji1303]

definitely will! would love to see your tank in person too. I will focus SPS for my 2nd batch of corals

[m0nkie]

Got a generator too, I see. What are you planning on powering with the generator? IME, the non inverter generators tend to be a little louder so I don't know if noise is an issue especially if you're running it at 2 in the morning.

I got this one fairly cheap from Jeffrey after he sold his tank stuff. I was going to use this to power my TV and some entertainment system during lights out. Maybe I'll put the return pump and heater on too.

IME my neighborhood only gets black out during scheduled maintenance or rolling black out. They typically take 12hrs and my tanks have gone through them without issue.

I do plan to get the Testla wall battery as soon as they become available. That should last me a day with solar charge.

when you share your generator with your neighbor i don't think they mind

:D

[Kosmos]

nice setup !

[calistyle]

sweet nectar!

nice to meet you the other day!

[roli112]

The sump is delayed for another week. Bah.. Can't do any plumbing. Taking the time to add more electrical outlets around the room. Drilled some holes for RODI line and bought a Spectrapure Maxcap. also wired a Cat6 cable to the tank for APEX.

some more goodies arrived..

plumbing parts.. wanted white and red tank for years but somehow ended up with all black. Black wall, black tank, black sump, red pipes

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161006_205625_zpsmoyijpiy.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161006_205625_zpsmoyijpiy.jpg.html)

4 Seaswirls arrived today
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161006_205637_zpsppnyoevd.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161006_205637_zpsppnyoevd.jpg.html)

room is starting to get crazy with equipment
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/Mobile%20Uploads/20161006_205756_zps8focqlhn.jpg (http://s29.photobucket.com/user/krzyaznm0nkie/media/Mobile%20Uploads/20161006_205756_zps8focqlhn.jpg.html)

All that Vodka is for dosing right?

[ycnibrc]

Thank God I read your thread and hire someone to do my plumbing....:-) however It's still very difficult to set up a new tank and transfer the old tank over in a short time. I have only 4 days left to move out of my old house and today I just start mixing water and add sand.

[m0nkie]

sweet nectar!

nice to meet you the other day!

Nice to finally meet you too Jordan!

[m0nkie]

Thank God I read your thread and hire someone to do my plumbing....:-) however It's still very difficult to set up a new tank and transfer the old tank over in a short time. I have only 4 days left to move out of my old house and today I just start mixing water and add sand.

Oh boy that is a lot of work in 4 days. Lmk if you need anything or help. I got alot of large temporary containers. Hundreds of gallons..

Plumbing was no fun.. Waking up to flooding is even worse. Glad that's over. And glad you dont have to deal with it. Haha.. It's a ton of fun standing nearby watching tho.

[ycnibrc]

Oh boy that is a lot of work in 4 days. Lmk if you need anything or help. I got alot of large temporary containers. Hundreds of gallons..

Plumbing was no fun.. Waking up to flooding is even worse. Glad that's over. And glad you dont have to deal with it. Haha.. It's a ton of fun standing nearby watching tho.

Thanks Bro I'm almost done with plumbing waiting for the water to clear and I will start bring live rock from my old tank everyday until wed then i will shut down the tank bring 150g of old water over and bring the rest of the fish and coral. I don't have much but some fish and corals. What city are you in may be when i'm done with my tank I can swing over and learn some more tricks.

[thirst]

I'm trying to set up new tanks at a new house and trying to cycle it before moving from old house... so much work...

Good luck with your next 4 days!


Sent from my iPhone using Tapatalk

[ycnibrc]

I'm trying to set up new tanks at a new house and trying to cycle it before moving from old house... so much work...

Good luck with your next 4 days!


Sent from my iPhone using Tapatalk

Thanks Thrist the hard work was done. Now I just need to bring my fish and corals over. I'm planing to re use 200g of the old water so it just like a big water change I hope.....

[ycnibrc]

Sorry Monkie for hijack your thread .........:clown:

[CoralsAddiction]

thanks! I just setup the car yesterday for snowboarding. Going to Mammoth in 2 weeks. I'll be at Skidazzle this weekend shopping for more gears.

Cali weather! beach and snow ready
https://scontent.xx.fbcdn.net/v/t1.0-9/15317815_10101477123674310_752847625797721591_n.jpg?oh=f29cc7cc714536b258e437c3e4315ce5&oe=58C3CC1B

Nice! I did some shredding yesterday in Tahoe. Check out eBay for gear. Great deals on it if you know your size, etc.
http://i1194.photobucket.com/albums/aa372/CoralsAddiction/Mobile%20Uploads/8F493040-F113-49C4-B48F-68B83EEAD9F4_zpscvylk2bq.jpg (http://s1194.photobucket.com/user/CoralsAddiction/media/Mobile%20Uploads/8F493040-F113-49C4-B48F-68B83EEAD9F4_zpscvylk2bq.jpg.html)

[m0nkie]

Sorry Monkie for hijack your thread .........:clown:

No problem. I live in 91789. Ill pm u my number when i get back from small nes yr vacation

[m0nkie]

Nice! I did some shredding yesterday in Tahoe. Check out eBay for gear. Great deals on it if you know your size, etc.
http://i1194.photobucket.com/albums/aa372/CoralsAddiction/Mobile%20Uploads/8F493040-F113-49C4-B48F-68B83EEAD9F4_zpscvylk2bq.jpg (http://s1194.photobucket.com/user/CoralsAddiction/media/Mobile%20Uploads/8F493040-F113-49C4-B48F-68B83EEAD9F4_zpscvylk2bq.jpg.html)

Sweeet.. Never been to tahoe. Went to mammoth and got snowed in a fes weeks ago. Amazing snow tho

[m0nkie]

been neglecting the tanks lately.. I'm still waiting on AA to finishing making my ATO container, stands/racks, and tank cover.. It's been over 4 months.. I'm not even looking forward to them anymore. just keep on cycling...
snails doing a good job cleaning it clean.. feeding algae waffers to keep them alive
http://i.imgur.com/UYnN14R.jpg

Got a new frag tank from Will. no more elbows in the water

http://i.imgur.com/0xCkTHa.jpg

seems like it's never big enough.. looks packed already
http://i.imgur.com/H2wlu7o.jpg

http://i.imgur.com/Tn7PpOv.jpg

[pga7602]

Whos will? Tank looks good.

[dodgerblew]

Whos will? Tank looks good.

My guess is Bustayanky

[pga7602]

My guess is Bustayanky

Never knew Will made tanks :p

[iSeeMax101]

Quit modding your car. You can't keep up with me like I can't keep up with your aquarium game haha

[m0nkie]

here's a quick update.

sooo after hearing just about every excuse in the book, John from Advanced Acrylic finally finished some products. products I paid for 10 months ago in Oct 2016.. while waiting, I started building my car and allowed the tank to cycle for 10 months..

work in progress
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/19397137_10101727238641910_2885882500506632909_n_zpssxirage4.jpg
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/19222967_10101729767439180_5622501436238658903_o_zpsf5ahqtzx.jpg
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/19366089_10101731987584990_4313448113131379855_n_zpsoo7zhhdq.jpg

ATO arrived today. 150gal. 50gal fresh for ATO, 100gal salt for AWC.
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/19429882_10101740979949220_4334794779592531596_n_zps2ykw1x2e.jpg
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/19260638_10101740979984150_1729182629804541046_n_zps2paw7bbr.jpg

bought a healthy female crosshatch trigger for $500. pretty good deal.. but now I have to find a male..
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/19388545_10101734306213440_4118991884829264720_o_zpsuo5kvpck.jpg

other fish in QT: 3 yellow tang, 1 convict tang, 1 yellow boxfish, 1 copperband butterfly, 1 algae blenny, 1 pair mandarin, 2 firefish
other fish in TTM: flame angel, sand sifting goby, Harlequin tuskfish, purple tang, cardinal
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20170626_182253_zpsbcnbumus.jpg

I put all my corals in.. still looks empty..

fish in tank: lightning clown, foxfish, 2 golden rhomboid wrasse, lineatus wrasse
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20170626_182054_zps1rigxoob.jpg
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20170626_182059_zpscpduuxky.jpg
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20170626_182106_zps2oea8z9a.jpg

[thirst]

10 months too soon to put in coral!!! Wait 1 more year!!


Sent from my iPhone using Tapatalk

[m0nkie]

:( I knew I should have cycled it longer.. tank ruined..

[m0nkie]

here's the tank cover AA made (peel still on).. I wasn't expecting it to be solid. thought it would have some netting. but I guess I didn't make it clear enough during instructions either so eh.. tank is already running at 83 degrees today. without house AC or any chiller. I think a full cover will be too much. these can be winter covers.. the little pop ups are for mounting my APEX night light LEDS. also comes with a spot for APEX autofeeder. side gaps are to fit the sea swirls

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20170626_182832_zpsmmwsvaok.jpg

[dodgerblew]

Get the lid from artfully acrylic.

[m0nkie]

Get the lid from artfully acrylic.

thanks. I'm going to do measurement again and talk with artfully acrylic. I was going for them last time but John convinced me he can make nice tops. This top looks like it was made in 10 minutes..

[deaclauderdale]

Get the lid from artfully acrylic.



+1


Sent from my iPhone using Tapatalk

[m0nkie]

request sent for Artfully Acrylic. looking forward to that one.

[dodgerblew]

You won't be disappointed

[iSeeMax101]

Top was probably made in 7 mins lol

[dorkymk3]

request sent for Artfully Acrylic. looking forward to that one.



I was disappointed with my artfully acrylic cover. For the price I paid it look not finish and raw still had shavings attach from the machining. But it does its job in keeping my sons hands and whatever he can from getting in the water.

[theMerchant]

Thanks for updating, looking forward to seeing the tank stocked.


Sent from my SM-G955U using Tapatalk

[BeanMachine]

I was disappointed with my artfully acrylic cover. For the price I paid it look not finish and raw still had shavings attach from the machining. But it does its job in keeping my sons hands and whatever he can from getting in the water.

Is there a nicer option though? I am really happy with mine. Much cleaner than any DIY or manufactured aquarium screen cover.

[bobafet1]

Looking good Tony!

[SchnitzelReef]

Looks good man. How are all those acros doing?

[moondoggy4]

I just found this thread, I bet that the solar panels said Damn when they saw that tank.

[m0nkie]

started carbon and gfo today. Trying out the Next Reef reactor. cool little toy.

water pumps in from the bottom, pushes out from the top and overflows around the edges. The base is a little bigger so you can place the reactor next to a wall and water won't flow out of sump.

the flaw.. hard to clean the dry carbon at first. and the entire reactor depends on 2 small 3mm o rings. lose either o-ring and the whole thing falls apart. and I don't think tumbling is possible..

http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20170628_172100_zpsdcqhauga.jpg
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20170628_172149_zpsbwnokgt0.jpg

also starting a little Star Wars rock.. death star & ATAT coming up
http://i29.photobucket.com/albums/c252/krzyaznm0nkie/20170628_172227_zpsypoxe71i.jpg

[theMerchant]

Looking good... there can only be one falcon lol

Sent from my SM-G955U using Tapatalk

[iSeeMax101]

Looking good... there can only be one falcon lol



He's not a real nerd

[m0nkie]

finished some rock works

Dark imperial corner
http://i.imgur.com/X2Sry4A.jpg
http://i.imgur.com/YF5XTFZ.jpg

and the rest...
http://i.imgur.com/TwUKlSQ.jpg
http://i.imgur.com/vB0QzoC.jpg

[thirst]

Nice!


Sent from my iPhone using Tapatalk

[pga7602]

Wow.. this is really cool. Please post pics as the ships get covered in coraline.

[iSeeMax101]

Should float some on fishing string for best effect

[thirst]

Wow.. this is really cool. Please post pics as the ships get covered in coraline.



I think it will have some hair algae and byropsis


Sent from my iPhone using Tapatalk

[m0nkie]

I think it will have some hair algae and byropsis


Sent from my iPhone using Tapatalk

I may not grow good corals but I know all about Bryopsis and algae.. grow and kill on command

[m0nkie]

got 2 anemones coming in next week. fingers crossed!

10" pink Haddoni carpet
http://i.imgur.com/x2UkhGJ.jpg

4" Colorado Sunburst
http://i.imgur.com/efEnaZe.jpg
http://i.imgur.com/f8kNcQo.jpg

[wishntoboutside]

Looking good

[ycnibrc]

Wow the pink carpet will be an awesome center piece

[iSeeMax101]

Hey, so what are you hosting your pics with now since photo bucket is a scam?

[m0nkie]

imgur.. pretty annoying. i used photobucket for over 10 years. currently saving all the photos down to host on google

[solitude127]

Wow, those are some amazing pieces

Sent from my SM-G930V using Tapatalk

[johndoe7127]

got 2 anemones coming in next week. fingers crossed!

10" pink Haddoni carpet
http://i.imgur.com/x2UkhGJ.jpg

4" Colorado Sunburst
http://i.imgur.com/efEnaZe.jpg
http://i.imgur.com/f8kNcQo.jpg
Where do you get sunburnt from?
I'm been looking for one