PDA

View Full Version : VR1-2 Amperage?


Isayso
10/13/2016, 06:02 AM
Hi Guys!
does Anybody know what is the amperage of VR1 and VR2?
I cant get a reading of it,
unless my volt meter is bad or I totally missed
I do measure in 2 ways...

#1 leave the red probe and set to 200ma and 20ma- NOT reading
#2 switch the red probe to 10A Still not reading
and of course the volt meter is part of the circuit meaning that
the red tip is touching the positive coming out of the apex,
and the negative probe is touching the red wire going to the ballast..
but nothing shows on the screen.

thanks guys.