PDA

View Full Version : adapters for royal exclusive reactors


cklayko
10/16/2016, 11:27 PM
I've bought the 1.5L and 3L reactors, the 1.5L will be for carbon and the 3L has the biopellet conversion kit. I plan to feed these from a manifold setup. My question is.. Is there an adapter kit available that fits the red inlet tube at the bottom on these reactors?

ReefClownMIA
10/17/2016, 10:00 AM
At the factory, when plumbed into a Dreambox we use Silicon hose to adapt and keep it flexible.
In my personal system, I use Silicon & vinyl hose.

cklayko
10/22/2016, 06:12 PM
Yes but I'm looking for a 90 degree as I've got limited space in my sump

Sent from my Nexus 5X using Tapatalk

ReefClownMIA
10/22/2016, 06:23 PM
Yes but I'm looking for a 90 degree as I've got limited space in my sump

Sent from my Nexus 5X using Tapatalk



We have the 90* elbows and 2" pieces of red pipe - this would allow you to come straight up and adapt to silicon/vinyl.


Sent from my iPhone using Tapatalk

cklayko
10/22/2016, 06:39 PM
That is exactly what I'm looking for, are these the same 90 degree elbows that came with the reactors? I've noticed they fit really loose.

Sent from my Nexus 5X using Tapatalk

ReefClownMIA
10/22/2016, 07:25 PM
That is exactly what I'm looking for, are these the same 90 degree elbows that came with the reactors? I've noticed they fit really loose.

Sent from my Nexus 5X using Tapatalk


It depends.
If you purchased the pellet conversion kit, you would've received a red pipe and elbow to go into the reactor, to turn the flow sideways rather than straight up at the diffuser plate.

If you did not purchase a pellet conversion kit, the. The elbow and pipe included are for the external adaption kit.



Sent from my iPhone using Tapatalk