View Full Version : BRS universal ro/di 150gpd watersaver

12/01/2016, 04:35 PM
So I snagged one of these with the special black Friday pricing, set it up today to flush it out via the washtub faucet adapter. Pressure coming out of faucet was originally gauged at 75+, once hooked to the RO portion I noticed it made it to 50psi. When I hooked up the dual DI canisters, pressure dropped a few points and the 1st DI canister only filled about 1/3 of the way and the second DI canister filled maybe 1/8....tds meter showed around 5-8ppm on line 1 and lines 2,3 show 0.....is this normal or should the 2 DI canisters be filling full?

Thanks in advance!

12/01/2016, 04:50 PM
Its totally normal for DI canisters to not be completely full of water..

12/01/2016, 06:11 PM
When I change the media they do the completely refill. It bothered me so I unscrewed it a little to let it fill to the top then tightened it. Purely for OCD reasons, it will work fine

Sent from my SAMSUNG-SM-N920A using Tapatalk