PDA

View Full Version : Help to choose the RO/DI please.


Berlibee
12/25/2016, 02:28 PM
Hello,

Can you help me to choose a RO/DI for my system.
I run a small 60g tank, I need only 15g a week for water changes and ATO.

My tap water is around 130 ppm here and I'm not sure about chlorine levels.
I'm looking for a RO/DI around $180-250 but I can add a few dollars if it really make a difference.

I'm spending around $315 a year for the water in my LFS and I want to cut this expenses. Thank you.

Alexey.

SpectraPure
12/26/2016, 07:03 PM
You could get the 5-stage Refurbished System for $170.99:

http://spectrapure.com/Refurbished-ROD-5-Stage-90-GPD-RODI-System-with-Double-DI

or, our flagship model MaxCap® 2:1 Manual Flush 90-GPD RO/DI System for $296.99:

http://spectrapure.com/MaxCap%C2%AE-Manual-Flush-90-GPD-RO-DI-System


Support at SpectraPure

Berlibee
12/27/2016, 08:05 AM
...

Berlibee
12/27/2016, 08:18 AM
Ok I will go with this one thank you
http://spectrapure.com/RO-RODI/RODI-SYSTEMS/MaxCap%C2%AE-Manual-Flush-90-GPD-RO-DI-System

And you don't have discounts for forum users?

SpectraPure
12/27/2016, 08:36 AM
MC-RODI-90-10-MF:

Better membrane - 99% rejection instead of 98%
Less waste water - 2:1 ratio instead of 4:1
Bigger DI cartridges - 33% bigger
Better Pre-Filters - Higher density for longer filter life
Two Dual TDS meters instead of one
Manual Flush Valve
Automatic Shut Off Valve
Inline Ball Valve
Float Valve
3-Year Warranty for non-filter parts instead of 1-Year

SpectraPure
12/27/2016, 08:38 AM
It has already been discounted for the Holidays. Get it this week.

Support at SpectraPure

Berlibee
12/27/2016, 08:55 AM
Can I ask you please, is it possible to use it for drinking water as well and get water before it is passing through DI ?

Berlibee
12/27/2016, 09:04 AM
Placed my order st your website and found it here a few mins later for 40 dollars less .... c'mon ...
http://www.aquacave.com/spectra-pure-maxcap-90-gpd-5-stage-ro-di-system-with-manual-membrane-flush-mc-rodi-90-10-mf.html

SpectraPure
12/27/2016, 09:10 AM
Good! We encourage supporting our dealers.

Call our Sales Line or send a message to sales at spectrapure dot com and cancel the order.

Support at SpectraPure

SpectraPure
12/27/2016, 09:14 AM
Yes, you can install a 3-way valve (one input to two outputs) after the membrane and before the DI section. Turn it one way to get DI, turn the other way to get RO for drinking.

http://spectrapure.com/3-Way-PVC-Ball-Valve-w-1-4in-quick-conect-fittings&filter_name=3-way

Berlibee
12/27/2016, 09:19 AM
Super! Thank you.

Berlibee
12/31/2016, 10:28 AM
Hello,

I've installed the RO/DI unit thank you. Very nice one !
Just one question to be sure, the three way valve to get drinking water should be installed on the blue tube after membrane ?

I've marked two places with green dots. This is the correct places to get drinking water ? :rolleyes:

SpectraPure
12/31/2016, 12:35 PM
Yes, your dots are correct, either end of that side of the ASO is RO water.

Scott at SpectraPure

Berlibee
01/01/2017, 04:20 PM
Thank you Scott. Happy New Year! ;)

Berlibee
01/01/2017, 04:21 PM
I have water around 130ppm and it is already 0 ppm OUT on the first TDS meter. :) Very happy with the product !