PDA

View Full Version : Tunze 6095 power supply


Felixc
12/26/2016, 11:40 AM
Hi,
My Tunze 6095 has been in used for about 4 years and lately it intermittently won't start up after it's been unplugged for cleaning. I believe the power supply is now dead as it won't start up this time. I want to replace the power supply but not sure if there are more than one model to consider. Please advise on which is my best option. Here is a picture of the original power supply that came with the pump.

364054


When I do a search for 6055.240 the result shows that it's for the 6055 pump, is 6055.240 used for both 6055 and 6095 pumps? Not sure which part I should be replace mine with?

rvitko
12/26/2016, 12:16 PM
6055.240 is the correct power supply for older 6055 and 6095, 6095.240 is used on newer ones that include a 7090 controller, they are 24V only, no switch or jumpers. 6055.240 is with the 6 jumpers to adjust power. Both are available.

Felixc
12/26/2016, 12:58 PM
Can the 6095.240 be used with my older style 6095 pump? This part is readily available where I am from, not sure where to find 6055.240 in Canada.

I am not using a controller just running the pump full blast.

I could never figure out how to user the jumper on the 6055.204, can you briefly explaining what setting it should be set at. Thanks.

rvitko
12/26/2016, 02:02 PM
The jumper determines the power of the pump, it is a way to control it with no controller, 24V is full power, 12 is half, everything else is in between. You can use 6095.240, you just won't be able to make the speed adjustment the voltage jumpers provide. You can order wither on Tunze.com or Amazon.