loc line parts list

[Hyde7278]

I have a coralife biocube 29 that i want to put a Loc Line spliter and ends on. The problem is i dont have the part that came with the tank that goes on the discharge pipe coming through the bulkhead.

My question is does any one know what part i will need that goes over the discharge pipe to connect the Loc Line to.

[Hyde7278]

No one?

[ravi197699]

there are plenty of parts based on the loc line size, If you go to ebay you can find ton of adaptors, but if you are looking for specific part number then it will be tough,

[billdogg]

www.savko.com or www.usplastics.com

[Blitz132]

I have a coralife biocube 29 that i want to put a Loc Line spliter and ends on. The problem is i dont have the part that came with the tank that goes on the discharge pipe coming through the bulkhead.

My question is does any one know what part i will need that goes over the discharge pipe to connect the Loc Line to.

I couldn't seem to find that part you are missing anywhere. You could always cut the pipe flush with the false wall and then get a loc line ball socket with MPT connector like in this video..

https://www.youtube.com/watch?v=TX_uzEWhmwk

I can tell you that I bought the 1/2 loc line Y adapter and it fits way to loose to the stock ball connector. It snaps in but is way to loose to stay. I plan on getting a 3/4 to 1/2 Y adapter and doing it like the following guy did..

https://www.youtube.com/watch?v=l_t_-v-smVg

[Lsufan]

It would be best if u used threaded bulkheads so u can screw the locline adapter straight into the bulkhead. If u did that all u need is the locline adapter like this


http://i61.photobucket.com/albums/h79/jkspears/2016-12/3D66AEB9-5771-4F91-A736-D2EFB89F98FF_zpslmbmbyol.png


If u can't do a threaded bulkhead then u would need a adapter to accept the locline adapter so u would need something like this


http://i61.photobucket.com/albums/h79/jkspears/2016-12/8F94BD80-4268-4F14-A2B2-9D7952BFFD50_zpsd3zpvlby.png

I like to use threaded bulkheads when I use locline because the adapter that u will need to thread in the locline adapter is hard to find in black. I don't like the look of a white adapter inside of the tank. If your return bulkhead is inside a overflow box & u can't see it then it doesn't really matter