PDA

View Full Version : Height of the Single RMS mount


ellisz
01/08/2017, 09:38 PM
Can you tell me what the height of the single RMS unit is from the XR30? I want to put a canopy over the tank and want to make sure I have enough clearance.

I saw one website that said you needed 12" but I know someone that measured an older one and it was only 10" off the top of the tank. Not sure if there have been changes to this mount?

Thanks

mfinn
01/09/2017, 08:16 AM
Can you tell me what the height of the single RMS unit is from the XR30? I want to put a canopy over the tank and want to make sure I have enough clearance.

I saw one website that said you needed 12" but I know someone that measured an older one and it was only 10" off the top of the tank. Not sure if there have been changes to this mount?

Thanks


I use RMS mounts and a rail system and if I wanted to build a canopy over the whole thing, I would want to build it with 10-3/4" clearance, but that would give about 1/4" clearance.

Alex Y EcoTech
01/10/2017, 11:05 AM
Can you tell me what the height of the single RMS unit is from the XR30? I want to put a canopy over the tank and want to make sure I have enough clearance.

I saw one website that said you needed 12" but I know someone that measured an older one and it was only 10" off the top of the tank. Not sure if there have been changes to this mount?

Thanks

Ellisz,

We have not made any changes to the RMS. That said, we recommend at least 12 inches to allow plenty of room to ensure the RMS fits inside your hood.