PDA

View Full Version : How to take apart Kessil a360


andrewkw
01/15/2017, 09:05 AM
One of my Kessils is blinking a lot lately. I have stopped this before by cleaning it. That being said I've never been able to get it fully to come apart. I really should have taken a photo but it's since been put back together. Really annoying the design of taking them apart because they certainly would benefit from a yearly cleaning or so.

The part I could not get apart are the long white plastic connectors so I can full access the fan and heatsink entirely. I could actually cut them and glue them back together since there is no electronic component to that part but hesitant to attempt if there is an easier way.

I can open it up again if need be but the blinking does seem to be reduced I'm going to give it a day to see how bad it is unless a solution presents itself here.

timnem70
01/15/2017, 09:32 AM
Don't know how long you've had it but the warranty is now void. Go to OfficeMax and get a can of dust cleaner. Spray the **** outta it.

Sent from my SM-G930V using Tapatalk