PDA

View Full Version : Maintenance kit needed


octopus737
01/15/2017, 10:03 AM
Hi I have an MP40W and it seems the plastic screw broken. How do I get support for your product for this simple part?

Thank you in advanced!

Jason

Spiffy
01/17/2017, 07:54 AM
There aren't any maintenance kits available anymore. You may have to ether find a replacement online somewhere, or upgrade to the QD.

mfinn
01/17/2017, 08:30 AM
Hi I have an MP40W and it seems the plastic screw broken. How do I get support for your product for this simple part?

Thank you in advanced!

Jason


I would give them a call and ask. Maybe someone there could find that one single part laying around somewhere.

Breadman03
01/17/2017, 08:44 AM
Both good bits of advice. I'll mention that you wouldn't have to upgrade the entire pump, but getting just the QD wet side would have you running again.

jccaclimber
01/18/2017, 05:56 PM
If you can't find it from Ecotech there is a plastic screw that is awfully close available from McMaster Carr. Assuming yours is the same as mine I posted the part number in here along with the thread spec. and length sometime is the last month or two.
You might even be able to find a compatible part at an Ace or similar smaller hardware store.