PDA

View Full Version : 6105 magnet doesn't hold 3/4" acrylic


ycnibrc
01/27/2017, 06:24 AM
Hello there
Do you have stronger magnet for the 6105 to work with 3/4" acrylic. I try to mount the 6105 but the pump is too heavy or the magnet is too weak and its slide down.

thanks

rvitko
01/27/2017, 09:15 AM
The stock magnet is for up to 1/2", to achieve a hold on 3/4" you will replace only the outside magnet with magnet extension 6205.501, a pair of these is for 1", so one of these halves and one stock half gets to 3/4".

ycnibrc
01/28/2017, 09:45 PM
so I only need to buy a pair and only use 1 for the outside magnet I have 2 x 6105 so 1 pair can use for both pump?

rvitko
01/30/2017, 08:56 AM
Correct, 6205.501 is a single, you could buy 2 of those or 6205.500 is a pair.