PDA

View Full Version : ATO programing question


Ajae
01/31/2017, 12:05 PM
I have the Avast Marine ATO which works great but I'm upgrading to my 225 here in a few weeks and I'm getting a Bute trash can that holds a lot more then my 5 gallon bucket. I have the program setup but I want to add another failsafe. I want it to stop after a certain amount of time. for example right now I know it takes about 2mins and 33secs to ill my sump back to normal levels what line do I need to add in order it for the pump to turn off regardless of what the sensor says, so if it's on for more than 5 mins then have the pump shut down? Thanks

Ajae
02/01/2017, 11:42 AM
...

scuzy
02/01/2017, 11:56 AM
Create a virtual outlet to check ato

Fallback OFF
Set OFF
If Output ATO = ON Then ON
Defer 010:00 Then ON


Then in ATO programming to

If output ato_check On then off


This will turn off auto after 10 min.


Sent from my iPhone using Tapatalk

Ajae
02/08/2017, 06:34 AM
thank you much! sorry for the late reply.