PDA

View Full Version : VDM Voltage Output


seldon
02/05/2017, 10:44 AM
I was doing some DIY and checking the various voltages on my VDM for V1/V2. I noticed a couple things.

1. When I set the output on VS1 or 2 I am only getting 8.5V across pins 1&2 and 5&6 respectively.

2. When i measure the voltage across Pin 2 and 3 and 6 and 7 I get 9.7V

Is it typical to get such a low voltage out of the outputs. Is it normal to always get 9.7V out of Pins 3 or 7?

My pin #s are using the image from the Neptune Forum DIY section.

https://forum.neptunesystems.com/attachment.php?attachmentid=589&d=1372990429