SSDiver
03/03/2017, 01:35 PM
Hi
I am trying to program my Ztelight QMaven ZT6600-A on my Apex system.
I have it hooked up to a VDM with a AI serial cable.
Have set the VDM to being "4 channel".
In Fusion have programmed all of my ramps.
I have the light outlet set to "Always" and is in "Auto" mode.
I have programmed all four channels as "Advanced"
For one of the channels (Blue) this is an example of what I have programmed for it.
Fallback OFF
Set OFF
If Time 09:00 to 10:00 Then Dawn_BLU
If Time 10:00 to 13:00 Then Sunrise_BLU
If Time 13:00 to 17:00 Then Daytime_BLU
If Time 17:00 to 20:00 Then Sunset_BLU
If Time 20:00 to 21:00 Then Night_BLU
In fusion is shows that the channels are ramping up % wise but no lights are actually turning on the light.
Please help if anyone has gotten there Zetlight to work on the Apex
Thanks In Advance
Mike
I am trying to program my Ztelight QMaven ZT6600-A on my Apex system.
I have it hooked up to a VDM with a AI serial cable.
Have set the VDM to being "4 channel".
In Fusion have programmed all of my ramps.
I have the light outlet set to "Always" and is in "Auto" mode.
I have programmed all four channels as "Advanced"
For one of the channels (Blue) this is an example of what I have programmed for it.
Fallback OFF
Set OFF
If Time 09:00 to 10:00 Then Dawn_BLU
If Time 10:00 to 13:00 Then Sunrise_BLU
If Time 13:00 to 17:00 Then Daytime_BLU
If Time 17:00 to 20:00 Then Sunset_BLU
If Time 20:00 to 21:00 Then Night_BLU
In fusion is shows that the channels are ramping up % wise but no lights are actually turning on the light.
Please help if anyone has gotten there Zetlight to work on the Apex
Thanks In Advance
Mike