Acrylic feeding ring

[quallabear]

Does anyone makes a clear acrylic feeding ring that will work with an auto feeder?

[henryle]

I have the eheim feeding station and it works great

[mcgyvr]

Does it need to be clear?
There are numerous feeding rings that are meant to be mounted to stay stationary.. (suction cup/clamp,etc.)

[quallabear]

I would prefer clear and I have a apex feeder I need to use it with. I have seen the posts for the bao ring but there out of stock and would like something like that. I am going to try the feeding station if I can't find something else I like.

[scooter31707]

It's not acrylic but I have 2 of these to go along with 2 Eheim feeders (1 for flake and 1 for pellets). It does a fabulous job of preventing food from going into the overflows before sinking.

http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=30049

[Vinny Kreyling]

DIY?, looks easy enough.

[Dcropley]

Id get a section of acrylic rod and heat it and wrap it around a cylinder of choice.

[ktownhero]

I have the eheim feeding station and it works great

I got this recently too and like it a lot. I use it with my eheim feeder but there's no reason it couldn't work with almost any feeder. It just basically creates a platform that anything can sit upon.

[theMerchant]

It's not acrylic but I have 2 of these to go along with 2 Eheim feeders (1 for flake and 1 for pellets). It does a fabulous job of preventing food from going into the overflows before sinking.

http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=30049
The TLF inside magent rusted on me, i didnt realize it until i took it out to clean.


Sent from my SM-N910T using Tapatalk