PDA

View Full Version : 125G Cycle: Red Sea Aquarium Test Kit - .08 Ammonia / 10-12 Nitrite / 20 Nitrate

gjustinj
04/06/2017, 01:01 PM
125G Cycle: Red Sea Aquarium Test Kit - .08 Ammonia / 10-12 Nitrite / 20 Nitrate

How is this looking everyone? I threw 3 pieces of cocktail shrimp in there in panythose to help boost this thing. It's only been cycling for a week with a Fluval FX4 cannister filter. The tank is 125 Gallons/mix of dry and live rock(125lb) and about a 1.5 inch thick sand bed mixed live and dry sand.

Any thoughts on if this cycled, or if this has a long way to go or what steps I can do to help it along, etc? :)

Thank you so much!
JVan82
04/06/2017, 01:04 PM
It's not cycled till ammonia and nitrite are 0. Once that happens dose with ammonia to 2ppm as a stress test. Should go back to 0 in a day, then large water change to drop nitrates and you're good. You can remove the shrimp since you have detectable ammonia, if u haven't already.

Sent from my SM-G920V using Tapatalk
gjustinj
04/06/2017, 01:30 PM
It's not cycled till ammonia and nitrite are 0. Once that happens dose with ammonia to 2ppm as a stress test. Should go back to 0 in a day, then large water change to drop nitrates and you're good. You can remove the shrimp since you have detectable ammonia, if u haven't already.

Sent from my SM-G920V using Tapatalk

Thank you! So basically keep watching for both ammonia and nitrite to reach zero, once I see that go buy another bottle of ammonia and dump it in there and watch for the ammonia to cycle to nitrite to nitrate - once nitrate is completed do a water change if high to bring it down and introduce some bottom crawlers?
JVan82
04/06/2017, 01:33 PM
Yes sir

Sent from my SM-G920V using Tapatalk
JUNBUG361
04/06/2017, 02:00 PM
You could add ammonia or bio spira to help
gjustinj
04/08/2017, 04:38 PM
Okay today's test read .08 ammonia / nitrite 1 / nitrate 50

More sand was added to the tank two nights ago as well as Octo 2000 protein skimmer.


Any suggestions on this? It's my understanding I wanted to see the ammonia hit 0 which I haven't yet. The nitrites to hit zero (they went up from before) and the nitrates to build up (its higher too).


Anyone have suggestions on what I need to do.