PDA

View Full Version : What inexpensive powerheads are you using inside of your Biocube29 (or similar)?


earthboy17
04/10/2017, 11:57 AM
Always trying to be thrifty, what powerheads are you using inside of your bio cube 29 or similar size tank?

I have a K5 power head and a maxijet1200 return, and it's just a little bit too much. I'm getting corals blown around, and large-grain sand / small rocks moved.

Thank you for your input and recommendations!

aznflyfisherman
04/10/2017, 12:54 PM
U use the stock coralife biocube pump n jebao rw4 fir more wster mivements n it works fine so far. Up n running for a year now

rockhead51
04/10/2017, 02:28 PM
I'm using the larger of the two Sicce Voyager Nano (I think mine is the 2000) and it is too much also. I like it, but it is 1 speed and too much. They do have a 1000 version. Worth a look.

Sent from my XT1254 using Tapatalk

TexChuck
04/12/2017, 08:15 AM
I'm running the stock return pump with an Innovative Marine spinstream, and a Jaebo PP-4 powerhead (< $50). I like it; I keep it on random mode @ ~75 power.

themummra
04/12/2017, 10:31 PM
Mj1200 as return pump and a wp-10. Honestly its almost probably too much. I have to run the wp-10 on the lowest setting.

HaKs310
04/13/2017, 12:50 PM
Tagging along.

Looking at replacing a Nano240 with a PP4 in a 12g NanoCube.

MrDemonicAngel
04/13/2017, 01:03 PM
I have a RS Max nano tank it using the stock return + wp10

homer1475
04/14/2017, 04:15 AM
When I had a biocube I ran a sicce syncra 2.0 return, and 2 mp10's on about 60% reefcrest mode. Not exactly cheap, but great products.

Before that it was the stock return and 3 hydor korralia nanos. Still plenty of flow, but added quite a bit of heat to the tank.