PDA

View Full Version : Mars Aqua Mounting


ksgriff88
05/26/2017, 01:42 PM
I got 2 MarsAqua lights today and have a little problem.....

Has anyone mounted these inside a standard hood? And if so how did you do it? I included a picture of hood.

Also if that doesn't work I have the Aqueon glass lids on the tank. Can I set the light directly on there?


Sent from my iPhone using Tapatalk

ksgriff88
05/26/2017, 01:44 PM
https://uploads.tapatalk-cdn.com/20170526/7987982e95624d575331b2795a5b653c.jpghttps://uploads.tapatalk-cdn.com/20170526/0a631aff51ef00663b46c3b52ee06c82.jpghttps://uploads.tapatalk-cdn.com/20170526/186aaebc876de15bd484dd8a9527a147.jpg


Sent from my iPhone using Tapatalk

scuzy
05/26/2017, 01:54 PM
The heat will burn out the led if sitting on glass.


Sent from my iPhone using Tapatalk Pro

rgulrich
05/27/2017, 04:47 AM
I used pocket door rails and drilled holes for the trucks in the fixture. Should be some pics in the Marsaqua thread. Make sure you have the clearance and install a handful of low noise 12v fans for air circulation.

Sent from my SCH-I545 using Tapatalk