PDA

View Full Version : 28g Nanocube LED Advanced Dead Strip


ferchb
05/26/2017, 09:02 PM
I have 28g JBJ LED Advanced. The previous owner removed the center strip and replaced it with 5 blues. Those 5 leds stopped working. There was moisture getting through the splash guard. I don't if that has anything to do with it but a fact I do know. It looks like 's few of the diodes are darker.

Looking for help as to try and learn the steps to:

A - Why did it stop working?
B - Is it fixable?

I have a multimeter but not 100% sure what to look for.

As long as I have it all apart I was thinking of changing some of the whites to blue and uv. Clearly since I'm asking the questions I don't know a lot about electronics like this. Is it hard to swap a diode?

https://uploads.tapatalk-cdn.com/20170527/3642b449e7d1712f772706083b479413.jpghttps://uploads.tapatalk-cdn.com/20170527/98467ef857be7eac773fe6a74440bfe9.jpghttps://uploads.tapatalk-cdn.com/20170527/8447ea9c2218bfc01e2c2a38809e535b.jpghttps://uploads.tapatalk-cdn.com/20170527/628cd16de28270d02f144a5929502418.jpghttps://uploads.tapatalk-cdn.com/20170527/5bd6de8c956fc227322e02072b192a20.jpg

Sent from my SM-G900V using Tapatalk