PDA

View Full Version : "Seahorse Breeding Build"..5 Gallon Marineland


Dirte_Plumber
07/01/2017, 11:26 AM
First Design of Upgraded Rio800, LED Upgrade and Plumbing Successful. As got closer and closer to completed cycle, came across more and more parts for my build.


As more parts were added had to re-evolve design in total! Adding a Carbon Reactor to Original Mod.

Then, had to reassign the fluval intended use to power the Bio-Tower/Refugium.
Then had to seed the reactor for future addition to filtration system.

Next: Finalizing Plumbing of Bio-Tower/Refugium, Secondary Carbon Reactor and Removing Original Mod.



Sent from my Z981 using Tapatalk

Dirte_Plumber
07/01/2017, 11:31 AM
First Design of Upgraded Rio800, LED Upgrade and Plumbing Successful. As got closer and closer to completed cycle, came across more and more parts for my build.


As more parts were added had to re-evolve design in total! Adding a Carbon Reactor to Original Mod.

Then, had to reassign the fluval intended use to power the Bio-Tower/Refugium.
Then had to seed the reactor for future addition to filtration system.

Next: Finalizing Plumbing of Bio-Tower/Refugium, Secondary Carbon Reactor and Removing Original Mod.



Sent from my Z981 using Tapatalk
https://uploads.tapatalk-cdn.com/20170701/fb72fdfc7486d2c4769eb2782c1bba30.jpghttps://uploads.tapatalk-cdn.com/20170701/4962d3c4db019a18069a6e6b6d10ee4a.jpghttps://uploads.tapatalk-cdn.com/20170701/f0df703d8dd170d10f06d5133956e8a6.jpghttps://uploads.tapatalk-cdn.com/20170701/6f4da28278083f1fba56406d9940d892.jpghttps://uploads.tapatalk-cdn.com/20170701/193862b5df7eee465b83769d5d1f202b.jpghttps://uploads.tapatalk-cdn.com/20170701/7b32c3b9677b3b68eee76b5e606cd623.jpghttps://uploads.tapatalk-cdn.com/20170701/136647ce0b61153a4e532e65d68ded27.jpghttps://uploads.tapatalk-cdn.com/20170701/6d9ab6c006874aa03693e251060f0667.jpghttps://uploads.tapatalk-cdn.com/20170701/ead88bcf8540e1fda91f65a93ded60c1.jpg

Sent from my Z981 using Tapatalk

Dirte_Plumber
07/01/2017, 11:56 AM
Just getting the Bio-Tower lid re tapped so 3/4 threaded PVC inlet and exhaust can replace 3/8 original..

Sent from my Z981 using Tapatalk

Dirte_Plumber
07/01/2017, 12:00 PM
By Adjusting Plumbing size can let media inside reactors naturally tune down overall turnover rate of fluval 405.

Them Valving Down with Stock Valve off Fluval and Plumbing T-d back to Fluval creating a loop that keep turn over rates within tolerance!

Running Into Uniquarium Area; creating ability to control flow and increase safety pre-trial change!

Sent from my Z981 using Tapatalk