View Full Version : Power Supply 1/4" valve

07/05/2017, 05:08 PM
Looking into powering Neptune 1/4" solenoid valve... the connector is designed to be plugged into a fmm

Looking at a PS-36-US

but online pictures indicated this is a round plug designed to power a fmm which can then supply power to the solenoid via the 1link cable.
A picture from Marine depot shows a round end

A picture from drsfostersmith shows it has a female 1link cable.

The description indicates that this (or another ) power supply SHOULD work!
"This solenoid valve can also be used with Neptune Systems` standalone 24VDC power supply (not included) if you do not own one of the above products and want to use this solenoid valve with your Energy Bar 8 or Energy Bar 4."


07/05/2017, 10:20 PM
You can use the same power supply for the PMUP to provide power to the Solenoid


07/06/2017, 06:25 AM
Thanks, about had myself talked into buying an energy bar 832. I don't NEED one. But hopefully someday this decade there will be a COR pump. I have an extra eb8 as it is!