PDA

View Full Version : Settings for a pair of Stream 3 (6150)


tlp
07/17/2017, 12:33 PM
Just need to confirm the set up for a pair of opposing pumps, at the back of the tank.

I've directly connected the two controllers using the Tunze cable. On one side selected "reverse" mode by holding the feed button for 5secs and its showing flashing red.

The other controller I want to put into "auto select" mode to find resonnance wave etc then switch to "wave ok".

Question - on the "reverse" pump do I leave it in the "flashing red" mode ? Or externally controlled?

Thanks

rvitko
07/17/2017, 01:46 PM
It should be in external mode.

tlp
07/18/2017, 02:19 AM
Thanks!