PDA

View Full Version : Tank Drilling Cleanup ?


Clowning_Around
07/30/2017, 05:13 PM
Not to long ago after just having finished cycling my new system I decided to redo my sump, overflow and plumbing plus add an ato (diy style ofc). Well the new sump is done and so I started the next task which involved took down my tank this weekend and drilling it. Im still Worthing on things but noticed some of the fine glass residue (particles) left under my plastic trim (see pic). I've hosed it down and tried to get water to flush the area in question out but this is what I currently have. Any ideas on how to remove/ clean?https://uploads.tapatalk-cdn.com/20170730/789a7d95be1c0b1fde5abe49c4235512.jpg

Sent from my SM-G930P using Tapatalk

Clowning_Around
07/30/2017, 07:02 PM
Just thought of one idea, may try compressed air...

Sent from my SM-G930P using Tapatalk

lingwendil
07/31/2017, 04:14 AM
Pressure washer dialed back a bit?

Vinny Kreyling
07/31/2017, 08:28 AM
No matter what wear protective eye covering on this job!

FamilyTank
07/31/2017, 02:42 PM
Hose with a nozzle on the end. That rim is flexible enough to bend a fuzz out of the way.

Clowning_Around
07/31/2017, 04:41 PM
Update :), with it dry compressed air worked great!

Sent from my SM-G930P using Tapatalk