PDA

View Full Version : 0 pressure guage reading


Pseudo69
10/02/2017, 12:05 AM
I shut down my tank in May. I left my UHE system wet. Alll cartridges were changed in Jan.I just restarted my tank and I turne on my UHE but the pressure guage isn't reading anything. I am getting production water with a TDS of 1. I have it hooked up correctly. What could be wrong?

Thanks

SpectraPure
10/02/2017, 09:49 AM
The very concentrated waste water inside the membrane housing has, over a stagnant period, precipitated out and formed a "grain" inside the pressure gauge.

You should be able to remove the gauge and gently work a safety pin into the hole on the back and dislodge the grain. A squirt bottle of clean water can help to flush it out.

Support at SpectraPure

Pseudo69
10/02/2017, 03:46 PM
Coool. Thanks