150g tank 60” long on 72” stand

[marekt]

I have 72x24 aquarium stand reinforced with steel I want to put 150g rimless glass tank which is 60x24x24 would be 6” from both sides . Would be safe to hold the weight

[Sk8r]

I think I'd like a couple more metal cross braces underneath that top: if wood, and it gets wet, it gets soft. You can get pipe and clamps and such at Lowes or HD or ACE and should be able to make it better. Also, triangular braces on all the corners would increase its strength considerably. I don't know where you are, but quake or just somebody leaning against a side could skew those braces dangerously. Salt water is about 8 lbs a gallon and that's a lot of weight...you know what happens to a vertical/horizontal frame structure if it gets a sideways force before it gets cross-braced: it tends to deform and collapse.

[marekt]

It has braces at the top see pic . Just sides are not going to sit on ends 6” from side.

[Sk8r]

If there are braces going across it that are not visible in the pic, ie, at the top, that would help.

[marekt]

Sorry picture is upside down

[Sk8r]

That makes it a lot better.

[ifarmer]

That makes it a lot better.

nice setup