Litremeter III beeping (driving me nuts)

[Stoli]

I have a litremeterIII doing my topoff. I only have the main pump hooked up. The system is telling me that Pump C needs maintenance. That would be OK except that Pump C is not hooked up. I don't have a pump A, B or C. The beeping is driving me nuts (in my office). Help!!!

[SpectraPure]

You do have a Pump A. It is the internal pump. Even though Pump C is not hooked up, you probably have Pump C in "ON" or "RUN" mode. If so, it accumulates hours regardless, and is now wanting you to perform the maintenance routine.

Go to "STOP" mode, press the right arrow (MAINT). It will ask you if you have serviced the missing pump. Press the up arrow (YES) to clear and reset the hours accumulator.

To prevent this in the future, just make sure the unused pump channels are "OFF".

Scott
SpectraPure, Inc.

[Stoli]

Thank you. Worked like a charm.