PDA

View Full Version : Icecap 660 3 PC bulb wiring diagram problem


spectr
03/27/2004, 01:18 PM
Hello,
I am trying to wire the icecap 660 using 3 CSL PC bulbs from the wiring diagram on the icecap website. The picture listed under the heading for the 660 wiring diagram is actually the picture for the 430 csl pc wiring diagram. After wiring with the wrong diagram and having one of the bulbs not light, I came back and checked the site again and saw that the diagram for the 430 and 660 are the same. On the 660 3 lamp wiring page, the picture properties say it the diagram for the 430 (CSL430-3.jpg). I was able to get the 660 wiring diagram by guessing the picture name.
http://www.icecapinc.com/images/CSL660-3.jpg
The one currently listed is
http://www.icecapinc.com/images/CSL430-3.jpg

Thanks,
Bryan

IceCap Service
03/27/2004, 01:27 PM
You are quite right! This has been up well over a year and no one has brought this to our attention and no one at Icecap has caught it. I will pass this info up the line and steps will be taken to correct the discrepancy.