Plumbing Distance

[dwall174]

Could you tell me how far from my water source I can plumb the supply & drain lines? My new tank is going to be about 40' away from the water source I use. What's the maximun distance I can run the supply & return lines? I do have 75 PSI line pressure at 60 degree water temp. Also is there any location better than the other to place the RO/DI unit.
1) Near tank 40' from supply line
2) Near the water source 40' from tank
3) In the middle 20' from tank & 20' from supply line

BTW I have a typhoon that I have replaced their 100 gpd membrane with your 60 gpd membrane! I also plan to add on your piggy back 60 gpd unit so I should have near 120 gpd.

Thanks

[SpectraPure]

It makes very little difference at these distances. Do whatever is most convienent.

Scott
SpectraPure, Inc.

[dwall174]

I was hoping that I could plumb it at the tank! :D
I was just concerned about running 40' to the unit then running another 40' drain line.