Auto Top Off

[jpf71]

I have your LLC as a spare. I now use your LiterMeter III for kalkwasser top off. But since I have it, I was wondering if there was a way to reverse the "theory" behind you LLC. What I want to be able to do is have the unit sense when water gets too high and stop producing water in my RO/DI vat. This way, I can set the LLC at the level in the sump which will be able to hold the water from a power outage and the 5 gallon vat that feeds the kalc reaktor. Sound Good? Seems like a good Safety factor. Or do you have a better suggestion?

[SpectraPure]

If you would send it back to us, we will modify it so it works like you want.

Scott
SpectraPure, Inc.

[jpf71]

What do you need....the metal box thing (technical term!!!!) and the tube???

[SpectraPure]

I have re-read your question. I am going to quote you directly from your first message:

"What I want to be able to do is have the unit sense when water gets too high and stop producing water in my RO/DI vat."

That actually sounds like what the LLC-S does now. Put the LLC in front of the RO/DI unit and the sensor tube in the vessel that you don't want to overflow. RO/DI water will flow until the level gets high enough. If I have misunderstood the question, please try again or give us a call.

Scott
SpectraPure, Inc.