View Full Version : Leaking 135gal tank for free
mdiddy7s
01/05/2006, 08:26 AM
I have a 135gal tank drilled in the back with a custom overflow with two 1" - 1 1/4" drains that has a leak in the bottom. I left it outside my place on the ground. If you would like it Please PM me and I can give you directions for pick up. If it is not picked up by Saturday, I am throwing it away.
Mike D
Knyght
01/05/2006, 08:37 AM
pm sent
:beachbum:
mdiddy7s
01/05/2006, 03:51 PM
Order of response: As these fall through, I will notify the next in line.
Knyight
Indoreefer
Marine_Junkie
Captnbunzo
Knyght
01/05/2006, 05:24 PM
The tank is gone.
sort of ;) I`ll be picking it up this evening or early tomorrow Mike. Thanks!!
:beachbum:
pwhitby
01/05/2006, 07:47 PM
Setting up a new tank Greg?
P.
JR719
01/05/2006, 10:36 PM
Greg, I wanted that tank! Set it up and take a few pics for me.
Knyght
01/06/2006, 11:33 AM
<a href=showthread.php?s=&postid=6432895#post6432895 target=_blank>Originally posted</a> by pwhitby
Setting up a new tank Greg?
P.
Maaaaaaaaaaaaayyyyyyyyyyyybbbeeeeee.
Gonna clean it up and see if it`s worth resealing first.
Wife has been wanting to set up another FW.
<a href=showthread.php?s=&postid=6434367#post6434367 target=_blank>Originally posted</a> by JR719
Greg, I wanted that tank! Set it up and take a few pics for me.
Come and see it for yourself.
:beachbum:
Travis L. Stevens
01/06/2006, 11:52 AM
<a href=showthread.php?s=&postid=6437322#post6437322 target=_blank>Originally posted</a> by Knyght
Gonna clean it up and see if it`s worth resealing first.
Something like that is always worth resealing. If you have the time.... ;) *points to his empty 44g pentagon and 20g hex*
Knyght
01/06/2006, 02:12 PM
<a href=showthread.php?s=&postid=6437470#post6437470 target=_blank>Originally posted</a> by Travis L. Stevens
Something like that is always worth resealing. If you have the time.... ;) *points to his empty 44g pentagon and 20g hex*
That`s kinda what I thought. The glass is all fine so far as I can tell. Ran some water over it this afternoon and should clean up well.
Took a few snaps of it. I`ll post once I get them online.
Thanks again to Mdiddy7s!
:beachbum:
Knyght
01/06/2006, 07:34 PM
This is the tank,
http://img.photobucket.com/albums/v256/knyght/swtank/135tank001.jpg
think I found the leak,
http://img.photobucket.com/albums/v256/knyght/swtank/135tank002.jpg
I striped the silicone that was on the bottom of the tank, wow.
just need to strip the bottom on the inside now.
:beachbum:
mdiddy7s
01/06/2006, 11:13 PM
I hope that it works out for you Greg. It was just more work than I was interested in tackling right then. Keep us posted.
Mike D
SeanF
01/07/2006, 07:25 AM
Personally if it was me I would strip all of the silicon out of that thing. If you just try to find the leak, strip it and reseal it most of the time it just doesn't work right. Rather than repeat the process again. The other thing is once a tank springs a leak more than likely the silicon is getting old and is probable going to spring another one in a different location.
Knyght
01/07/2006, 08:39 AM
That was my train of thought, at least for the bottom, do you think I should reseal the entire tank tho? The side seams look pretty good.
:beachbum:
SeanF
01/07/2006, 08:52 AM
If it was me I would. I have always had the best long term luck with stripping all of the silicon and redoing it. For smaller tanks a little patch job will usually work but you are looking at the possibility of a 135 gallon tank with a leak toward the bottom of the tank. I have never seen how far that much water will spread but I will tell you that 72 gallons of water will go a long way when it is spread out on the floor and if it was me I would just take the extra time and effort to make sure that I didn't have to find out how big of a mess 135 gallons would make.
Knyght
01/07/2006, 09:19 AM
Sounds like good advice.
:beachbum:
mdiddy7s
01/23/2006, 08:10 PM
Please let us know if you were able to do anything with the tank. I know that I am interested to know. Were you able to reseal it and stop it from leaking? Please post some pics of the process.
Mike D
Knyght
01/24/2006, 08:11 AM
Mike,
I have alot of the old silicone scraped off as of now.
Since classes have started again it`s been pretty hectic. I`m sure the tank is resealable, just need the time to do it.
I`ll keep you updated, and thanks again for the tank.
:beachbum:
Knyght
03/14/2006, 08:52 PM
Since it has been awhile I thought that I would update.
I have the tank on the stand full of water :cool:
Pics to follow.
Knyght
03/14/2006, 09:05 PM
Here is one to get y`all goin` :)
http://img.photobucket.com/albums/v256/knyght/135/135.jpg
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.