View Full Version : emergency
msuzuki126
02/23/2006, 06:11 PM
my rio 1800 powerhead just stopped working. I can feel vibration but it just wont blow water. Any suggestions pleaseee
BlueCorn
02/23/2006, 06:12 PM
Take it out of the tank and unplug it before it melts down.
msuzuki126
02/23/2006, 06:14 PM
ok then do what?
integlikewhoa
02/23/2006, 06:15 PM
Yup. take it out. and check it out. Might have broke the shaft or impeller. I dont see a 1800 model number. but heres a link to what you probley need.
http://www.marinedepot.com/md_viewItem.asp?idproduct=TA4529
msuzuki126
02/23/2006, 06:22 PM
ok thanks, but the pump acutually started working again but then ceased again.. what should i do overnight
grupper
02/23/2006, 06:40 PM
Take it out, clean it, run some vinegar water through it for several minutes, rinse it again and put it back into your tank.
Then consider buying a backup pump in case this one decide to die on you.
AcroSteve
02/23/2006, 07:07 PM
<a href=showthread.php?s=&postid=6811811#post6811811 target=_blank>Originally posted</a> by grupper
Then consider buying a backup pump in case this one decide to die on you.
I have a different opinion. Buy a new primary pump and throw the rio away. It is not worth the risk.
Is that the only flow in the tank?
integlikewhoa
02/23/2006, 07:38 PM
The thing is probley all caked up inside. But it is true havent you heard how cheesy thos pumps are. And how many of them melted down.
Johnsteph10
02/23/2006, 08:06 PM
Based on the multitude of bad experiences with Rio pumps, I would take it out and replace it with a dependable pump.
How much flow are you looking to replaced?
msuzuki126
02/23/2006, 08:09 PM
idk, my tank is only a 37
mr pink floyd
02/23/2006, 08:57 PM
take the impeller out, put it back in and tuern it on my powerheasd does that all the time then it works after i do that
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.