Keeping snails out of pump returns

[jeffberg]

My sump is a multi divided fuge with a tank return and skimmer return. My problem is I put some snails in to the fuge to handle the algae and they end up getting in the pump returns causing big problems.I have had this set up for 2 years without snails and no problems but the algae was over growing the fuge. the snails did a great job until they go to the return intakes. Is there anyway to keep the snails out of the return fittings. Jeff

[der Riff-Konig]

Is there baffles between the sections?

[Brandon's Reef]

use eggcrate to block off where they must get or you could also use strainers.

[der Riff-Konig]

The reason I asked about the baffles is, I took some of the plastic netting that comes in HOB overflows and cut it to fit into the baffle areas. Just like the overflow.

[jeffberg]

Yes there are baffles between sections. Egg crate sounds like an option; where could I obtain strainers?

[Brandon's Reef]

what kind of pumps are they?

[der Riff-Konig]

this might work
http://www.aquaticeco.com/index.cfm/fuseaction/product.detail/iid/11977/cid/3040

[jeffberg]

I have a blue line for return and gen x pcx 55hp for mr 2 skimmer on one tank both pressure rated. I have a gen x pcx 70 hp on my other tank

[jeffberg]

Where can I Get a strainer to fit inside of bulkhead?