PDA

View Full Version : hey i have no idea about sumps

lordmbsa
04/12/2006, 01:51 PM
hey i have a 56 g tank and i wanna make my old 30g tank a sump can anyone help me or tell me were i can get diagrams to help me out and tell me wat i need
Paintbug
04/12/2006, 01:56 PM
this should help
http://www.melevsreef.com/allmysumps.html
Toddrtrex
04/12/2006, 01:59 PM
I don't have any diagrams, but here is a couple of pictures of my 30g sump ( I have more pictures if needed ). The first section (right) is the inflow/skimmer section (ASM 1GX), than the baffles (over, under, over).
A fuge section, one baffle with slots. The last section is the return section, I did not drill the tank, and I use an external pump.

http://i5.photobucket.com/albums/y189/toddrtrex/30gsump.jpg

Old picture:
http://i5.photobucket.com/albums/y189/toddrtrex/Sump/P5240040.jpg
lordmbsa
04/12/2006, 02:17 PM
dam i have to put in glass dividers it looks like so that means i have to take out the new water i mixed in it
Toddrtrex
04/12/2006, 02:20 PM
Actually I used acrylic, but same thing. Yes, you would need it to be dry, and unless you already have it in the spot you want it, you would have to remove the water to move it.
lordmbsa
04/12/2006, 02:22 PM
i have it in the stand the way i want it
Toddrtrex
04/12/2006, 02:24 PM
Ahh, okay. I am sure there is a way to do it with water in it, how I don't know. However, I think it would be a heck of alot easier dry.
If the water is saltwater, just use it for a water change in the main tank.
lordmbsa
04/12/2006, 02:27 PM
well i just got the 56 cycled sooo hopfully i can just put tthe water in buckets all this bc a fish died and carbon
lordmbsa
04/12/2006, 02:28 PM
correction copper
zimmy1979
04/12/2006, 02:28 PM
My basic sump + fuge setup:
(I have the fuge just overflowing into the sump which works out really well so far and is really easy to do).

http://i51.photobucket.com/albums/f386/zimmy1979/MH5.jpg
Paintbug
04/12/2006, 02:40 PM
copper in what?
lordmbsa
04/12/2006, 04:02 PM
my water and it was too high for the 30 so i upgraded
Paintbug
04/12/2006, 07:29 PM
how did it get there? have you cleaned the tank with acid? copper will stay in the glass, silicon, LS, and LR. it may keep you from having any inverts. check with the chemistry forum here Randy can point you in the right direction on copper.
lordmbsa
04/12/2006, 07:37 PM
well i didnt put the water in my 56 and i wash it out and scrapped the glass off that should help alot
im gonig to waight for about two or three months before i put my frog spawn and green tip torche and etc. in the tank