Cutting Starboard

[onehundred20]

Im wondering how I cut the starboard for corner overflows in a AGA 120.

[MCary]

Starboard cuts pretty easy. What tools do you have and how thick is the starboard? I used a tablesaw to cut 3/8 inch. A handsaw, jigsaw, circular saw or bandsaw will all work.

Mike

[onehundred20]

well I need to know how to cut the round corners so it will fit around the overflows, i have access to pretty much any tool.

[xtrstangx]

Jigsaw is probably the easiest. I would trace the outline of the overflow on and then just jigsaw it

[masterswimmer]

<a href=showthread.php?s=&postid=7327617#post7327617 target=_blank>Originally posted</a> by xtrstangx
Jigsaw is probably the easiest. I would trace the outline of the overflow on and then just jigsaw it

I have a bowfront and I did just what you said. I traced the outline on the starboard and used a jigsaw. Cuts like a hot knife through butter.

swimmer

[MCary]

There you go.