frag plugs!!!

[gemini aquarius(t)]

what is the cheapest for the quality frag plugs this will be for a bussiness so bulk is fine im looking for at least 20 for 100 or better

thanks

i know about boston aqua farms

[sterling18]

http://www.bostonaquafarms.com/

cheap price and fully cured to be used.

[sharkdude]

I had some samples of these
http://www.aquaticodyssey.com/coral/coralpegs.htm
ask for Vince, and mention sharkdude refered you.

I passed the samples to Hugo (aka snipersps) to try out for his home and new store Aquatic Marine in Stanton, CA.

[ALTI]

make them youself. it cost just pennies to make them. ive gone through about 2000 already and it would have been kinda pricey to buy that many. if u dont have time to wait for curing go to home depot and get the famowood 2 part epoxy glazing for wood finishing and mix with sand or crushed coral. there is a thread on making faux sandbeds with it somewhere here on rc. it costs about 16-18 bucks but you should get at least 400-600 plugs out of it depending on size of the plugs. it takes 72 hours to fully harden and you can use them right away.

[gemini aquarius(t)]

ok thanks ALTI

sharkdude, do you think that we could get a group buy on these things in the socal thread? cause 45 bux for100 is pricy

[sharkdude]

$45 for 100 may seem pricy upfront, but just add an extra $1 to your frag sales price and you are covered.

For frag framer retailers like Alti, it makes sense to mass produce. For someone like you Gemini, who is very limited production goals, just bust up some dead rock.
Or propose a group DIY project and everyone goes home with some.

[shoddyk]

I have a 100ct ref pub bag that I bought from Bostonaquafarms a few months ago that is unopened that I can ship to you for 25.00 including shipping

[gemini aquarius(t)]

sharkdude: please explain the group diy project

shoddyk: sorry but i have to decline to that offer im really not interested in baf

[jim48442]

i use rock rubble the lfs sells it for $3 a pound and you get alot for a pound

[gemini aquarius(t)]

yeah i thought about thats so maybe ill trey that for a while

[hamburglar]

I'm pulling about 50lbs out of my curing tank this afternoon. They have been in a 28 gallon tank with my RO/DI waste water overflowing for 12 weeks.

PM if you are interested in some. I don't usually sell them, but I have a lot right now, so I might as well get rid of some for cheap.

[akrimmel]

i have some of these and they work great for fragging.

http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=CP-FPLUG&Category_Code=

[gemini aquarius(t)]

DANG!!!! 1 buck eeaacchh?????

[akrimmel]

well it depends on what # you buy.

[mr_miagi32]

If your going to buy something like that, just use golf tees

[akrimmel]

WAY THICKER AND WIDER THAN A TEE

[ezcompany]

the fat plastic golf tees might work!