View Full Version : Recommendations for 7095/6100
The_Taz_Devil
06/12/2006, 05:23 AM
I have a friend with a 7095 with single 6100 stream, they wanted to know what the best setting would be in their tank ?
rvitko
06/12/2006, 09:19 AM
With one 6100 your only option is pulse mode.
The_Taz_Devil
06/12/2006, 09:31 AM
I thought that would be the case, I would suspect 3 sec intervals would be ok. Thanks for the reply Roger.
The_Taz_Devil
06/12/2006, 09:47 AM
Sorry Roger, last question.
If you only have one stream connected to the controller then you only have the option to use pulse. Would you recommend you do this in 3 second pulses, basically I believe the unit will pulse for this period using a speed between the 2 speeds you have set on the bottom 2 dials (min and max). This will change every 3 seconds to a different value between the 2, but just ensure that the lowest speed is over 30% - is that correct......im sure all this is in the information documents but I have lost them......
rvitko
06/13/2006, 01:31 PM
Yes, that is exactly how I would do it.
The_Taz_Devil
06/14/2006, 05:08 AM
Thanks Roger
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.