PDA

View Full Version : CO2 parts


elosusa
06/29/2006, 03:17 AM
I thought I would add some pictures for our CO2 parts. A lot of people have asked me about getting our glass bubble counter as a separate part. I have some of these available now as well as a few other CO2 parts. Enjoy the pictures and let me know if you have any questions.

Conta- CO2 bubble counter
http://reefcentral.com/gallery/data/500/113960conta.jpg


EV2000- Magnetic solenoid
http://reefcentral.com/gallery/data/500/113960ev2000.JPG

Detailed shot of the quick release fittings.
http://reefcentral.com/gallery/data/500/113960EV2000detail.JPG

elosusa
07/06/2006, 12:46 AM
I did not mention a feature of the EV2000 that some people may find useful. The quick release fitting on the "entrance" side has 2 positions. One is if you want your solenoid to "fail" in the closed position and the other is if you want your solenoid to "fail" in the open position. Here are a few detailed pictures to show the two positions. The quick release fitting simply screws in with a small o-ring for a tight fit.

http://reefcentral.com/gallery/data/500/113960ev20006.JPG
When the solenoid is off or unplugged it will be closed with this position of the quick release fitting.


http://reefcentral.com/gallery/data/500/113960ev20005.JPG
When the solenoid is off or unplugged it will be open with this position of the quick release fitting.

Let me know if you have any questions.