PDA

View Full Version : One of My DC8's isnt working

MdM31
07/28/2006, 11:57 AM
I have it daisychained to another DC8 and when I plug something into it it doesnt turn on. Could it be a blown fuse or something??

I kno my breaker hasnt flipped so thats not the problem. Maybe I do not have it daisy chained correctly? I have tried putting the data cable in both outlets but it does nothing.

please help me out.

-Mike
MdM31
07/28/2006, 03:45 PM
come on guys i need some help!
Slickdonkey
07/28/2006, 04:04 PM
Yeah, could be a fuse. I think you can open these units up and replace them. I assume none of the outlets are working? Also you should get a green light on the side when connected to the AC3.
clp
07/29/2006, 04:58 PM
The most likely problem is a blown fuse. Remove the 8 screws on the sides of the DC8, and then pull the two halves apart. THe fuse is located on the circuit board next to socket A1. The fuse is a 15 Amp, 5x20 mm, 120V.

Curt