Nabob89
08/08/2006, 02:40 AM
I decided that my CSS-65 looked dirty on the inside and had way too much salt creep on the outside, so I decided to remove it from the tank and clean it. I removed the pump from the skimmer and rinsed it out (only took off the intake nozzle....never disassembled)....then I rinsed out the body of the skimmer with fresh water. When I turned it back on, the bubble line now is located halfway up the nozzle inside the collection cup and I can't lower it at all. Before I had it at the bottom of the cup, now it seems to be much too high. Also, TONS of micro bubbles are now swirling around the tank....that never happened before. Will this problem go away? Please offer any help....thanks
Matt
Matt