Making Saltwater

[FunkeFish]

Is it a necessity to let freshly made saltwater stand for 24 hours before you do a water change?

[kraze3]

Its not that you want it to stand for 24 hrs, you want it to mix for 24 hours. If its an emrgency I would say you could let it mix for less. IMO its a good idea to let it mix for the 24 just to make sure everything is disolved and ready to go.

[afelder]

Not always. It depends on what brand of salt you are using. Also some quick fixes exist. Get a power drill and a paint mixing bit. Stir for 10 minutes with the drill (for a 5 gallon bucket). In 10 minutes enough air should be added to stabalize most mixes. If you don't want to buy a mixing bit you can use a whisk it takes a little longer and is tough on the arms though.

Good Luck
Ariel

[Bradco]

is it a problem if you leave it mixed in 45 gallon with power head and heater for 5 days before water change?

[kraze3]

Shouldnt be a problem, jsut make sure there is nothing else getting in there. I mix mine in 32 galon tubs. Fill with about 20 gallons of water, drop in a powerhead and heater close the lid and I use it as I need it.