MOD's for max jet

[dermer]

ok so im not real sure on all the mods for a maxjet up for any info and ideas

[dermer]

sorry i have 1200 maxjet powerheads

[utah024]

um....what exactly is your question? I've only built one of the mods (a 900 with a double dumas 1.25" prop), they work A LOT better than usual maxi-jets and don't cost much more in parts at all

[outy]

try this site

mjmods.com

[Kaos]

Maxi-Jet Stream Mod (http://http://reefcentral.com/forums/showthread.php?s=&threadid=611354&perpage=25&pagenumber=1)

This is probably the most popular. There is another thread about taking a bioball (the ones w/ the pins) and making a needlewheel out of it for the MJ's. An alternative (probably not as effective though) is to take the air tube and run it into the intake side of the MJ. This will also make allot of tiny bubbles to run a skimmer. You can also buy some of the cheap-o glass cleaner magnets from WalMart and glue them to the MJ's for mounts. I've used this before w/ 400's and 1200's. It's really nice because you can position them anywhere you want and they won't fall off like the suction cup bracket do.

[dermer]

thanks thats what i was looking for

[Snarkys]

<a href=showthread.php?s=&postid=8038192#post8038192 target=_blank>Originally posted</a> by Kaos
Maxi-Jet Stream Mod (http://http://reefcentral.com/forums/showthread.php?s=&threadid=611354&perpage=25&pagenumber=1)

This is probably the most popular. There is another thread about taking a bioball (the ones w/ the pins) and making a needlewheel out of it for the MJ's. An alternative (probably not as effective though) is to take the air tube and run it into the intake side of the MJ. This will also make allot of tiny bubbles to run a skimmer. You can also buy some of the cheap-o glass cleaner magnets from WalMart and glue them to the MJ's for mounts. I've used this before w/ 400's and 1200's. It's really nice because you can position them anywhere you want and they won't fall off like the suction cup bracket do.


link is no good : (

[gary faulkner]

Where in Wal-Mart do you get the magnets?

[Snarkys]

can also try this. looks pretty easy to me

http://www.cawanee.com/magnetmounts/magnetmounts1.htm

they sell cheap magnets here.

http://www.magnet4less.com/index.html