PDA

View Full Version : ASM G-1X - bad Sedra pump...


PITSTOP
10/19/2006, 04:55 PM
Jeremy,

The Sedra pump on my ASM G-1X has never worked well. Since I've had this skimmer, the pump locks up and is hard to start - I can usually get it to start witht the impeller housing pulled 1/2 way off, and then try to shimmy the housing back on without stopping the impeller.

I have tried everything - careful cleanings with vinegar down inside the shaft - everything on the pump clean like new - no dice.

So, how do I go about replacing the pump or imppeller or both - please advise...thanks

Jeremy B.
10/19/2006, 08:06 PM
Hi,

Sorry to hear you are having trouble with that pump. Please give us a call during our business hours, 9am - 6pm est M-F, and we'll be more than happy to get you taken care of. You can also email your information to me directly if you'd like at [email protected]

Thanks,
Jeremy