PDA

View Full Version : 220v Socket Expansion

tacocat
10/26/2006, 11:36 AM
What does the receptacle for the 220v Socket Exapnsion look like? Are they reconfigurable?
Slickdonkey
10/27/2006, 11:00 AM
I'm interested in this too. What would be nice is a DC8-style device for 220V. That way I could wire up all four of my ballasts this way.
tacocat
10/27/2006, 11:12 AM
How long is the cord to the Expansion Socket?
clp
10/27/2006, 04:55 PM
Since there really isn't too much standardization in the US for 220V outlets, we made the connection on the 220V socket expansion (SE) screw terminals. The end user is responsible for connecting the 220V source power cord to the socket expansion circuit board. There 4 power input screw terminals (Ground, Neutral, Hot1, and Hot2), and 4 power output screw terminals (Ground, Neutral, Hot1, and Hot2). Both Hot1 & Hot2 are switched. If aren't qualified to hook this box up, get an electrician to do it for you.

On the 120V socket expansion the cords are 6' long.

Curt
tacocat
10/28/2006, 12:19 AM
Excellent, My Aqualogic chiller uses a strange configuration.

Thanks