PDA

View Full Version : Help installing JBJ Arctica 1/10 Chiller


Newreeflady
11/19/2006, 11:03 PM
Hi guys. I got this chiller from you all last week, was hoping to set it up this weekend, but I ran into a wall.

The instructions say to remove Hose Nut --- Check

then remove the Gasket - Um, how? This thing is ON there. I don't want to damage it, so how do I remove it w/o damage?

Thanks,
Angela

Jeremy B.
11/20/2006, 08:55 AM
Hi Angela,

Are you referring to the cone shaped gasket that slides down into the hole of the inlet and outlet of the chiller? This might be very tight, but it does remove, just be a little stronger with it.

If you have any questions feel free to give us a call at 317-895-9005.

Thanks,
Jeremy

Newreeflady
11/20/2006, 11:30 AM
Ok, thanks Jeremy. I was worried to harm the gasket, but we got them off.

I will call if any further trouble. I plan to install it Tuesday now.

Best,
Angela